About this module
A house does not fall down in one day. It leaks a little, cracks a little and rots a little, for months, while nobody looks. This module teaches you to look, to fix the small things, and to call the right expert before small becomes big.
Who it is for. Homeowners, tenants, caretakers of family houses and compounds, house helps, hostel and church caretakers, young people who want a first skill, and persons with disabilities. National Proficiency I is the first level of Ghana's TVET framework, for routine tasks done under supervision.
CTVET status. No CTVET programme for home maintenance by owners and caretakers was found; CTVET's programmes cover the building trades themselves. This module is not a CTVET curriculum. It follows CTVET's format.
The hard gate: you maintain; you do not do trade work. In this course you never:
- open, change or extend wiring, sockets, switches, ceiling roses, breakers or the meter. In Ghana nobody may do electrical wiring on premises unless the Energy Commission has certified them. That person is a Certified Electrical Wiring Professional (CEWP);
- cut, join or move water pipes inside walls, or touch the water company's meter;
- repair a crack that is wide, growing or diagonal, a sagging beam or a leaning wall. That is a job for a qualified engineer;
- spray pesticides inside a house (Level 2 explains licensed pest control);
- enter a septic tank, soakaway or deep drain chamber, ever;
- climb onto a roof (Level 2 teaches roof checks from the ground and from a ladder).
If you see sparks, smell burning, get a shock, see water running from a wall or ceiling, or see a crack open wider: stop, make the area safe, and call the right expert. In an emergency (fire, a person shocked, injured or trapped), call 112.
How the module works
Each unit has learning outcomes, performance criteria, the range and the evidence your assessor needs. You are judged Competent or Not Yet Competent from what your assessor sees, asks and reads in your logbook. About 70% of the time is practical.
Where the guidance comes from. Ghana's rules come from the Energy Commission, the Assemblies and the Environmental Protection Authority. Practical care steps come from official bodies abroad: the United States Environmental Protection Agency (water leaks, mould, septic systems), the UK Health and Safety Executive (ladders), the UK Building Research Establishment (cracks), Australian state governments (termites) and Canada's Centre for Occupational Health and Safety. These are foreign sources and are labelled. They fit Ghanaian houses well, but Ghana's own rules and the maker's instructions always come first.
Honesty rule. Numbers marked example were invented to teach the method. Where a Ghana fact could not be found on an official page, the book says not verified and names the office to ask.
Other hub courses you will hear about. House Electrical Wiring; Basic Plumbing; Painting and Decorating; Floor and Wall Tiling; Masonry and Plastering; Carpentry and Furniture; Home Appliance Care; Home Fire and Gas Safety; Home Water Safety; First Aid and Community Health Helper. This book stays at the owner's level and points you to those courses for trade work.
Unit 1 · The home check walk and your basic tool kit
Walk the same route every month, with the same checklist. You will see the drip, the damp patch and the new crack while they are still small.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 1.1 Carry out a home check walk | follows a fixed route outside and inside, uses the checklist, and records every finding with a date |
| 1.2 Rate what you find | sorts each finding into "fix now myself", "fix soon myself", "call an expert" or "emergency" |
| 1.3 Assemble and care for a basic tool kit | names each tool, uses it for its job, keeps it clean and stored |
| 1.4 Find the house's key controls | finds and labels the main water stop valve, the electrical main switch, and the gas cylinder valve |
Range. One house, flat, compound house or hostel block. Evidence. A completed check walk sheet; a labelled sketch of the key controls; a tool kit check; oral questions.
Ask a qualified expert. This unit teaches you to find problems, not to fix trade work. For wiring and sockets use a licensed electrician (a CEWP certified by the Energy Commission); for structural cracks a qualified engineer; for pipes inside walls a trained plumber. Do not attempt work you are not trained and authorised to do.
Why a fixed route works
If you walk the house in a different order every time, you will miss things. Choose a route and keep it:
- Outside, top to bottom: roof line (from the ground), gutters and downpipes, walls, windows, doors, the ground around the house, drains, the septic tank cover and the compound wall.
- Inside, room by room, top to bottom in each room: ceiling, walls, windows, floor, then fittings (taps, toilet, sink, lights, sockets, doors, locks).
- Last, the key controls: the main water stop valve, the electrical main switch (at the consumer unit, often called the "breaker box"), and the gas cylinder valve.
The check walk sheet
Copy this table into your logbook. One row for each thing you notice.
| Date | Where | What I saw | Rating | Action and by whom | Done (date) |
|---|---|---|---|---|---|
| 3 Nov (example) | Bathroom | Tap drips about once a second | Fix soon myself | Change washer (Unit 2) | 5 Nov |
| 3 Nov (example) | Bedroom 2 | Socket face scorched | Call an expert | Owner to call a CEWP | |
| 3 Nov (example) | Front wall | Diagonal crack from window corner, about 4 mm | Call an expert | Owner to call an engineer |
Four ratings
- Emergency: danger to people now: fire, smoke, sparks, gas smell, water near electrics, a person shocked or hurt, a wall or ceiling that looks ready to fall. Get people out, call 112, then tell the owner.
- Call an expert: anything electrical beyond a bulb or a plug fuse; any crack that is wide, growing, diagonal or near a beam; water coming from inside a wall; a sagging ceiling; signs of termites; a full or smelly septic tank.
- Fix soon myself: a dripping tap, a running toilet, a slow sink, a sticking door, a stiff lock, a small area of mould, a blown bulb.
- Fix now myself: something you can do in minutes that stops harm: closing a stop valve under a leaking pipe, wiping up water, moving a cylinder outside.
Know the key controls
Every adult in the house should know where to turn things off.
- Main water stop valve. Usually near where the supply pipe enters the compound, close to the water meter, or inside near the kitchen. Turn it clockwise to close. Test it: if it is stuck, report it.
- Electrical main switch. On the consumer unit (breaker box). Switching it off cuts power to the whole house. You may switch it off in an emergency and to make work safe. You may not open the box cover.
- Gas cylinder valve. On top of the LPG cylinder, which should stand outside (see the hub's Home Fire and Gas Safety course).
Ghana's mains electricity supply is 230 volts at 50 hertz, and Ghana uses plug types D and G. That voltage can kill. Respect it.
Do a check walk
- Get the owner's permission. Agree which rooms you may enter.
- Take the checklist, a pencil, a torch and a tape measure. No tools for fixing yet.
- Walk the outside route, then each room top to bottom.
- Write every finding in the table, with a rating.
- Find the three key controls. Draw a simple sketch of the house and mark them.
- Put a label at each control: "MAIN WATER: turn clockwise to close", "MAIN SWITCH".
- Show the owner the sheet and the sketch. Agree who does each action.
Your basic tool kit
Buy good tools from a trusted hardware shop. A cheap screwdriver that bends will damage screws and your hands.
| Tool | What it is for | Care |
|---|---|---|
| Screwdriver set (flat and cross-head, several sizes) | Screws on hinges, locks, tap handles, plug tops | Use the size that fits the screw head exactly |
| Adjustable spanner | Nuts on taps, trap fittings, toilet connectors | Close the jaws tight to avoid rounding nuts |
| Water-pump pliers | Gripping pipe nuts and trap rings | Wrap chrome parts in a cloth first |
| Claw hammer | Nails, light tapping | Check the head is tight |
| Tape measure (5 m) | Measuring doors, cracks, areas | Do not let it snap back |
| Spirit level | Checking doors, shelves, frames | Keep it from falling; it loses accuracy |
| Torch | Looking under sinks, behind toilets, into ceilings | Spare batteries |
| Sink plunger (cup type) | Blocked sinks and basins | Wash after use |
| Hand drain auger (snake) | Blockages a plunger cannot clear | Clean and dry after use |
| Utility knife | Cutting tape, scraping | Retract the blade; keep from children |
| Thread seal tape (PTFE tape) | Sealing threaded water joints | Keep clean |
| Spare tap washers and O-rings | Dripping taps | Keep sizes in a labelled box |
| Steel ruler or crack-width card | Measuring cracks | Keep flat and clean |
| Gloves, safety glasses, N95 masks | Protection | Replace when worn |
| Toolbox | Keeping it all together | Keep it locked away from children |
Not in this kit: a voltage tester and electrician's tools. Testing circuits is electrician's work.
Cost a tool kit (all prices are example)
Screwdriver set GH¢80; adjustable spanner GH¢70; water-pump pliers GH¢45; claw hammer GH¢60; tape measure GH¢30; torch GH¢40; plunger GH¢40; utility knife GH¢25; thread seal tape GH¢10; washer and O-ring box GH¢20; toolbox GH¢120; gloves GH¢25; safety glasses GH¢30. (a) What does the kit cost? (b) If you save GH¢50 a week, how many weeks until you can buy it?
Your own house
Do a check walk of the house where you live. Fill at least eight rows. Draw the sketch with the three key controls. Bring both to class.
Check yourself
- In what order do you walk a house?
- Name the four ratings.
- Name the three key controls every adult should be able to find.
Unit 2 · Taps, toilets and sinks
A tap that drips once a second throws away thousands of litres a year. A toilet that runs all night can waste more. Most of these fixes cost a washer and half an hour.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 2.1 Isolate water safely | closes the right valve, opens the tap to drain, and checks the water is off |
| 2.2 Fix a dripping tap | identifies the tap type and replaces a washer, O-ring or cartridge of the same size |
| 2.3 Fix a running toilet | finds a leak with the dye test and adjusts or replaces a flapper, seal or float |
| 2.4 Clear a blocked sink | uses a plunger, cleans a trap and uses an auger, without chemical drain cleaners |
Range. Pillar and mixer taps; close-coupled and high-level cisterns; kitchen sinks and wash-hand basins. Evidence. Observation on the practice board and in a real house; meter or dye-test record; oral questions.
Ask a qualified expert. Pipes inside walls, burst pipes, water heaters, pumps, the water company's meter and anything that keeps leaking after your fix are for a trained plumber (the hub's Basic Plumbing course). Do not attempt work you are not trained and authorised to do.
Why leaks matter
- A tap that drips at one drip per second can waste more than 3,000 US gallons a year. That is about 11,000 litres.
- Worn toilet flappers, dripping taps and other leaking valves are the most common leaks in homes.
- A running toilet can waste up to 200 US gallons (about 750 litres) a day.
Is there a hidden leak? Read the water meter. Use no water for two hours. Read it again. If the reading changed, there is probably a leak. If you have a polytank instead of a meter, mark the water level and check it after two hours with no water use.
Turn the water off first
- Find the small valve on the pipe under the sink or behind the toilet (an isolating valve). Turn it a quarter turn or clockwise until it stops.
- No isolating valve? Close the main stop valve (Unit 1).
- Open the tap to let the water in the pipe run out.
- Put the plug in the sink, so small parts cannot fall into the drain.
Taps: know the type
| Type | How it works | What usually wears |
|---|---|---|
| Pillar (compression) tap, with a handle you turn several times | A rubber washer presses down on a seat | The washer; sometimes the O-ring on the spindle |
| Quarter-turn tap (handle turns only a quarter) | Two ceramic discs in a cartridge | The cartridge or its seals |
| Single-lever mixer | One cartridge mixes hot and cold | The cartridge; O-rings on the spout |
Drip from the spout = washer or cartridge. Leak around the handle = O-ring or gland.
Change a washer on a pillar tap
- Turn the water off and drain the tap (above). Plug the sink.
- Prise off the cap on the handle with a flat screwdriver. Undo the screw under it and pull off the handle.
- Wrap the tap body in a cloth. With the spanner, undo the large nut (the headgear). Hold the tap body with the other hand so you do not twist the pipe.
- Lift out the headgear. The washer is at the bottom, held by a small nut or pressed on.
- Take the old washer to the shop if you are unsure of the size. Fit a new one of the same size.
- While it is open, change the O-ring on the spindle if it is flat or cracked.
- Refit the headgear hand-tight, then a quarter turn more with the spanner. Do not over-tighten.
- Refit the handle. Turn the water on slowly. Check for drips at the spout and around the handle for five minutes.
- Write it on your check sheet.
Change a cartridge on a quarter-turn or lever tap
- Water off; drain; plug the sink.
- Remove the handle (often a hidden screw under a cap).
- Undo the cartridge nut with the spanner, holding the tap body.
- Pull out the cartridge. Take it to the shop: cartridges come in many sizes and spline counts. Buy the same model.
- Fit the new cartridge the same way round. Tighten firmly, not hard.
- Handle back on; water on slowly; check for five minutes.
Toilets that run
A toilet that keeps running, or refills by itself every few minutes, is leaking water from the cistern into the bowl.
The dye test and the fix
- Lift the cistern lid. Put a few drops of food colouring in the cistern water. Do not flush.
- Wait 10 minutes. If colour shows in the bowl, the flush valve leaks.
- Look at the water level. If water runs into the overflow pipe, the float is set too high: adjust the float or its screw so the water stops about 2 cm below the overflow top (or at the mark inside the cistern).
- If the level is correct but the dye leaks through, the flapper or the seal of the push-button valve is worn or dirty. Turn off the isolating valve, flush to empty, and wipe the seal and its seat. Test again.
- Still leaking? Replace the flapper or the seal with one made for that cistern (take the old one to the shop).
- Refill and test again with dye.
- If the inlet valve hisses or the cistern cracks, call a plumber.
Blocked sinks
Blocked kitchen sinks are mostly grease, food and soap. Blocked basins are mostly hair and soap.
No chemical drain cleaners in this course. They can burn skin and eyes, and they can splash when you then use a plunger. The US Environmental Protection Agency advises avoiding chemical drain openers and using boiling water or a drain snake instead. Never mix cleaning chemicals. If someone has already poured a chemical into the sink, do not plunge: wait, ventilate, and call a plumber.
Clear a blocked sink, step by step
- Gloves and glasses on. Bail out standing water into a bucket.
- Boiling water (kitchen sink, metal pipes and traps only; not on plastic traps or a ceramic basin full of cold water): pour slowly, then test. Use hot tap water for plastic.
- Plunger: block the overflow hole with a wet cloth. Put 5 cm of water in the sink. Seal the plunger cup over the drain. Push and pull firmly 10 to 15 times. Lift and check. Repeat twice.
- Clean the trap: put a bucket under the trap. Undo the trap rings by hand or with water-pump pliers wrapped in cloth. Empty and clean the trap. Check the washers. Refit hand-tight. Run water and check for leaks.
- Auger (snake): if the block is past the trap, feed the auger into the waste pipe, turning the handle, until you feel the block. Work it back and forth. Pull out slowly. Clean the auger.
- Run hot water for two minutes.
- If it is still blocked, or several drains are slow together, the problem is further down (Level 2, Unit 2 and Unit 5). Report it.
Prevention: pour cooking oil and grease into a tin and put it in the bin, never down the sink. Scrape plates. Use a sink strainer. Clean basin plugs of hair weekly.
What a drip costs (all figures are example)
A tap drips 1 litre every hour. (a) How many litres in a day? (b) In 30 days? (c) In a year of 365 days? (d) If water costs GH¢15 for 1,000 litres (example price), what does the drip cost in a year?
Leak hunt
In your house, do the two-hour meter (or tank) test and the dye test on every toilet. Write the results. Fix one simple leak with an adult's permission, or write what is needed.
Check yourself
- What is the first thing you do before opening a tap?
- A toilet passes the dye test but water runs into the overflow. What is wrong?
- Why do we not use chemical drain cleaners in this course?
Unit 3 · Bulbs, plug fuses and the safe limit of electrical work
Changing a bulb is a safe job. Changing a socket is not your job. Know exactly where the line is, and never cross it.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 3.1 Know the legal limit | states that wiring needs an Energy Commission-certified person and lists the owner's allowed tasks |
| 3.2 Change a bulb safely | switches off, lets the bulb cool, uses a stable step, fits the correct cap and wattage |
| 3.3 Change a plug fuse | unplugs, opens a type G plug, fits a fuse of the rating marked for the appliance, checks the cord grip |
| 3.4 Respond to a tripped breaker | unplugs the likely appliance, resets once from the outside of the board, and calls an electrician if it trips again |
Range. Ceiling and wall lights with screw (E27, E14) and bayonet (B22) caps; LED and other bulbs; type G fused plugs; a consumer unit with miniature circuit breakers (MCBs) and a residual current device (RCD). Evidence. Observation on a practice board with no supply; oral questions on the limit; logbook.
Ask a qualified expert. Any work on wiring, sockets, switches, ceiling roses, breakers, the meter or the earth must be done by a licensed electrician: a Certified Electrical Wiring Professional (CEWP) certified by the Energy Commission. The hub's House Electrical Wiring course trains that trade. Do not attempt work you are not trained and authorised to do.
The law and the line
- Under Ghana's Electrical Wiring Regulations, 2011 (L.I. 2008), a person may not do electrical wiring on premises unless the Energy Commission has certified them.
- The Energy Commission certifies wiring professionals for domestic, commercial and industrial work, and wiring inspectors who inspect and test; it publishes registers of certified professionals by region, including the Western Region. Ask to see the electrician's certificate and identity card, and check the register.
- In Australia, the state regulator Energy Safe Victoria says changing power points or light switches is not a do-it-yourself job, even though they look small. This is a foreign source, but the same danger exists in every house.
What the owner, tenant or caretaker may do in this course:
- Change a bulb (lamp) in an existing fitting, with the switch off and the bulb cool
- Change the fuse inside a type G (three square pins) plug for one of the rating marked on the appliance or in its manual
- Switch off the main switch in an emergency or before a bulb job in a fitting with no switch
- Reset a tripped breaker once, from the front of the board, after unplugging the likely cause
- Report scorched, loose, cracked or hot sockets, switches and plugs
What you never do: open a socket, switch, ceiling rose, consumer unit or meter; replace a breaker; rewire a plug that is moulded on; repair a cord with tape; fit a higher fuse "because it keeps blowing"; touch anything electrical with wet hands or while standing in water.
Changing a bulb
Change a bulb, step by step
- Switch the light off at the wall switch. If there is no switch on the fitting, switch off at the main switch and tell the household.
- Wait 5 minutes if the bulb was on. Old-style bulbs get very hot.
- Use a stepladder that is open fully, on a level floor, with someone holding it. Never stand on a chair on a table, a bucket or a bed.
- Screw cap (E27 large, E14 small): turn anticlockwise to remove. Bayonet cap (B22): push up gently, turn anticlockwise, pull down.
- Read the old bulb: cap type, watts, and the fitting's maximum watts (often on a label inside the fitting).
- Fit the new bulb: the same cap, no more than the fitting's maximum. An LED bulb that gives the same light uses far fewer watts.
- Switch on and test. Put the old bulb in a box, not loose in a bin (glass cuts).
- If a new bulb blows at once, or the fitting is scorched, loose or buzzing: switch off and report it for an electrician.
Broken bulb in the holder: switch off at the main switch. Do not use fingers or metal pliers. Report it for an electrician if you are unsure. Sweep up glass with gloves and a damp paper towel.
Plug fuses
Ghana uses plug types D and G. Type G plugs (three flat rectangular pins) usually contain a small cartridge fuse. The fuse protects the cord and the appliance. Its rating (for example 3 A or 13 A) must match what the appliance maker states. Never wrap a fuse in foil or fit a bigger one.
Change a plug fuse
- Switch off at the socket and pull the plug out.
- Undo the main screw on the plug face. Some plugs have a small fuse cover you can lever out instead.
- Lift out the old fuse. Read its rating.
- Check the manual or the appliance label for the right rating. Fit a new fuse of that rating, with a mark from a trusted maker.
- While it is open, check: the cord grip holds the outer sheath (not the coloured wires); no bare copper shows; no burn marks. If anything is loose or burnt, close it, tag it "DO NOT USE" and report it. You do not rewire plugs in this course.
- Close the plug firmly. Plug in and test.
- If the new fuse blows at once, the appliance has a fault: stop and call a trained repairer.
When a breaker trips
A breaker (MCB) or the residual current device (RCD, often a "test" button on it) switches off when something is wrong: too much load, a short circuit or current leaking to earth. It is protecting you.
- Switch off and unplug the appliances on that circuit.
- Open the board's front door only (never the cover with screws). Push the tripped switch back to ON once.
- Plug appliances back in one at a time. If it trips when one is plugged in, that appliance has a fault: leave it unplugged and call a repairer.
- If it trips again with nothing plugged in, or trips more than once, stop. Call a CEWP.
Old wiring. Under L.I. 2008, wiring in public and commercial buildings must be inspected and tested ten years after it was first installed and used, by a Certified Electrical Wiring Inspector. For a family house, a check by a CEWP every few years is wise; how often is not set for homes in what we read (not verified; ask the Energy Commission).
LED or old bulb? (all figures are example)
An old bulb uses 60 W. An LED bulb giving similar light uses 9 W. Each is on 5 hours a day for 30 days. Electricity costs GH¢2.00 per kWh (example). (a) kWh used by each in 30 days? (b) Cost of each? (c) Saving per bulb per month?
Your house's electrical list
List every light fitting and its bulb type in your house. Find the consumer unit and count the breakers (do not open the cover). List any scorched, loose or cracked sockets or switches for the owner to give to a CEWP.
Check yourself
- Who may do electrical wiring in Ghana?
- Name three electrical tasks the owner may do in this course.
- A breaker trips again with nothing plugged in. What do you do?
Unit 4 · Doors, hinges and locks
A door that sticks gets kicked, and a door that gets kicked breaks its frame. A lock that is stiff gets forced, and a forced lock fails on the night you need it.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 4.1 Find why a door sticks or drops | checks gaps, hinges, screws and the frame with a level and a torch |
| 4.2 Fix loose hinges | tightens or replaces screws, and packs or plugs worn screw holes |
| 4.3 Ease and care for locks | cleans and lubricates locks and keyholes with a suitable product, adjusts the striker plate |
| 4.4 Know when to call a carpenter or locksmith | names signs of a warped door, rotten frame, broken lock body or security risk |
Range. Timber and metal doors on butt hinges; mortice locks, cylinder locks, padlocks, bolts. Evidence. Observation on a real door; oral questions; logbook.
Ask a qualified expert. A warped door, a frame rotten by damp or termites, a broken lock body, or any door that is part of a fire escape route should be handled by a trained carpenter (the hub's Carpentry and Furniture course) or a locksmith. Termite damage needs licensed pest control (Level 2). Do not attempt work you are not trained and authorised to do.
Why doors stick
| What you see | Likely cause | Owner-level fix |
|---|---|---|
| Door rubs at the top on the lock side | Top hinge screws loose; door has dropped | Tighten top hinge screws (practical below) |
| Door rubs at the bottom | Bottom hinge loose, or floor has risen (new tiles) | Tighten screws; report if the floor is the cause |
| Door sticks only in the rainy season | Timber swells with damp | Wait for dry weather; then a carpenter can plane and seal the edge |
| Latch will not catch | Striker plate out of line | Adjust the striker plate |
| Gap gets wider at the top over months | Frame or wall moving | Report: may be a structural sign (Unit 5) |
| Soft, crumbly wood at the bottom of the frame | Rot or termites | Report: carpenter and pest control |
Hinges
Tighten or repair loose hinge screws
- Open the door and put a wedge (folded cardboard or a wooden wedge) under it so it does not hang on the hinges.
- Try each hinge screw with a screwdriver that fits exactly. Tighten.
- If a screw just turns and does not grip, the hole is worn. Take the screw out.
- Pack the hole: push in two or three wooden matchsticks or a sliver of wood with a little wood glue, snap them off flush and let the glue set (as long as the glue tin says).
- Drive the screw back in. Or use a longer screw of the same thickness that reaches into the frame behind.
- Remove the wedge. Open and close the door ten times. It should swing freely and latch without lifting.
- Put one drop of light machine oil on each hinge pin if it squeaks. Wipe off the extra.
Locks and keyholes
- Clean the keyhole with a short burst of air (blow, or a pump) to remove dust; harmattan dust and sea salt near the coast both make locks stiff.
- Use a lubricant the lock maker recommends. Many makers recommend a dry lubricant (graphite or a dry spray) for cylinder locks, because oil collects dust. Follow the maker's instructions.
- Never force a key. If the key is bent or worn, get a new copy from the original key.
- If the latch does not catch, loosen the striker plate screws on the frame, move the plate a little toward where the latch hits, and tighten. Pack the old holes as for hinges.
- Lost key, broken lock body, or after a break-in: call a locksmith and the owner. Security is covered in the hub's Home Security course.
Lock care visit
- Check every outside door: does it lock and unlock smoothly from both sides?
- Clean keyholes; lubricate with the right product; work the key ten times.
- Check the striker plate and the bolt throw (how far the bolt goes into the frame).
- Check that inside doors on escape routes open without a key from the inside, or that the key hangs near the door where adults know.
- Record each door on your check sheet.
Door gap
A door should have an even gap of about 3 mm around it (example figure for this exercise). You measure 3 mm at the hinge side, 1 mm at the top on the lock side and 6 mm at the top on the hinge side. (a) Which way has the door dropped? (b) What do you check first?
Door survey
Check every door in your house. For each, write: opens freely (yes/no), latches (yes/no), locks smoothly (yes/no), hinge screws tight (yes/no), signs of rot or termites (yes/no). Fix one hinge if needed, with permission.
Check yourself
- A screw turns but will not tighten. What do you do?
- Why might a dry lubricant be better than oil in a lock?
- Name two door problems you must report rather than fix.
Unit 5 · Walls: small cracks and warning cracks
Most cracks are only skin deep. A few are the house telling you something serious. Measure, record and watch, and call an engineer when the crack is wide, growing or in the wrong place.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 5.1 Describe a crack | records where it is, its direction, length and width with a date |
| 5.2 Tell small cracks from warning cracks | sorts cracks using width, shape, growth and location |
| 5.3 Monitor a crack | marks the ends and width and re-measures on a set date |
| 5.4 Know who to call | calls an engineer for warning cracks; leaves small cracks for redecoration |
Range. Plastered blockwork walls, ceilings, floors and compound walls. Evidence. Crack record sheet with two readings; oral questions.
Ask a qualified expert. A wide, growing, diagonal or stepped crack, a crack through a beam, column or lintel, a leaning wall, a sagging ceiling or doors that suddenly jam must be seen by a qualified civil or structural engineer. Do not fill or paint over a warning crack, and do not attempt work you are not trained and authorised to do.
What a crack-width scale says
The UK Building Research Establishment (BRE) sorts damage to houses into six categories, 0 to 5, from BRE Digest 251. This is a foreign guide; Ghana's own crack guidance was not found (not verified; ask the Ghana Institution of Engineering or your Assembly's Works Department).
- Categories 0 to 2: cracks up to 5 mm wide. BRE calls these "aesthetic": they usually need only redecoration.
- Categories 3 and 4: "serviceability" damage, which affects weather-tightness and the working of doors and windows.
- Category 5: "stability" damage, likely to need structural work.
- Whether the cracks are getting wider over time also affects the category, and a building professional should be consulted where damage is significant.
Small cracks and warning cracks
| Usually small (watch, then fill when redecorating) | Warning signs (call an engineer) |
|---|---|
| Fine hairline cracks in plaster, like a spider web or a map | Wider than about 5 mm, or several cracks of a few millimetres together |
| Straight crack where a wall meets the ceiling or a column (two materials moving differently) | Diagonal cracks running from the corners of windows and doors |
| Short cracks in new plaster that do not grow | Stepped cracks following the block joints |
| A crack that is wider at one end than the other | |
| A crack that grows from one reading to the next | |
| Cracks in beams, columns, lintels or the slab | |
| Doors and windows that start to jam; floors that slope; a wall that leans or bulges |
Even a small crack can let rain in on an outside wall; record it and fill it at the right time (Level 2).
Measure and monitor a crack
- Clean dust from the crack with a soft brush.
- Measure the length with the tape. Note the direction: straight up, across, diagonal or stepped.
- Measure the widest point with a steel ruler or a crack-width card. Write it in millimetres.
- With a pencil, mark the two ends of the crack with a short line and the date. Draw two small marks either side of the widest point, about 5 cm apart, and measure the distance between them.
- Photograph it with a ruler beside it, and write the date on the photo label.
- Fill in the crack record (below).
- Measure again on the same day next month (sooner after heavy rain or if the owner is worried). If it is longer, wider or the marks have moved apart, rate it "call an engineer".
| Crack no. | Room/wall | Direction | Length | Width | Date | Next check | Rating |
|---|---|---|---|---|---|---|---|
| 1 (example) | Living room, east wall | Diagonal from window corner | 600 mm | 4 mm | 3 Nov | 3 Dec | Call an engineer (diagonal from opening) |
| 2 (example) | Bedroom ceiling line | Straight, along the joint | 1,200 mm | 0.5 mm | 3 Nov | 3 Dec | Watch; fill when painting |
Permits. Structural alterations and renovation work on a building need a permit from the Assembly; the Accra Metropolitan Assembly's guide, for example, says renovation of facade, fixtures or sewage system needs a renovation permit and structural changes need a permit. For Takoradi, ask STMA's Physical Planning or Works Department before structural repairs begin. Ghana's Building Code (GS 1207:2018) is published by the Ghana Standards Authority.
Sort the cracks
(a) A 0.2 mm map-pattern crack in bedroom plaster, unchanged after two months. (b) A 3 mm diagonal crack from the corner of a window that was 2 mm last month. (c) A 7 mm crack in a compound wall that leans outward. Rate each one and say who acts.
Write the date on everything. A crack record without dates is useless. The most important question an engineer will ask is: "Is it growing?"
Crack hunt
Find three cracks in your house or compound. Fill the crack record for each. Measure them again in two weeks (the teacher will set a date) and bring both readings.
Check yourself
- Up to what width does the BRE scale treat cracks as "aesthetic"?
- Name three warning signs.
- Why do you mark the ends of a crack with the date?
Unit 6 · Damp and mould
Mould is not the problem. Water is the problem. Kill the water and the mould has nothing to live on.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 6.1 Find the source of damp | tells rising damp, rain penetration, leaks and condensation apart from the pattern and place |
| 6.2 Decide who cleans | decides by size and cause whether the owner or a professional cleans |
| 6.3 Clean a small area of mould safely | wears an N95 mask, gloves and goggles, scrubs with detergent and water, dries fully |
| 6.4 Prevent it coming back | fixes or reports the water source and improves airflow |
Range. Bathrooms, kitchens, bedrooms, store rooms and wardrobes. Evidence. Damp diagnosis sheet; observation of a safe clean; prevention plan.
Ask a qualified expert. People with asthma, allergies or weak immunity, babies and older people should keep away from mould cleaning; if anyone feels unwell, see a doctor or nurse. Large areas, mould after flooding or sewage, and damp that comes from inside walls or the roof need a professional and a trained plumber or builder. Do not attempt work you are not trained and authorised to do.
Moisture control is mould control
The US Environmental Protection Agency says the key to mould control is moisture control: fix the water problem, or the mould will come back. Dry wet materials within 24 to 48 hours to stop mould growing. Keep indoor humidity below 60%, ideally 30 to 50%. These are foreign (US) guidelines; Ghana's coastal humidity is often high, so airflow matters even more.
Where does the water come from?
| Pattern | Likely source | What to do |
|---|---|---|
| Tide mark low on the wall, up to about knee height, white salts, flaking paint | Rising damp from the ground (missing or broken damp-proof course, soil piled against the wall) | Clear soil and rubbish from the foot of outside walls; keep drains clear; report for a builder |
| Patch on an outside wall that grows after rain | Rain getting in: cracks, failed render, blocked gutter overflowing | Check gutters and cracks (Level 2); report |
| Patch on a ceiling | Roof leak or a pipe above | Report: roof or plumbing |
| Patch around a pipe, under a sink, behind a toilet | Leaking pipe or joint | Fix if owner level (Unit 2); otherwise a plumber |
| Black spots on cold walls, behind wardrobes, in corners of bathrooms | Condensation: wet air from cooking, bathing, drying clothes indoors | More airflow; extractor fans; move furniture 5 cm from walls |
Small or big?
The EPA says a mouldy area of about 10 square feet (about 1 square metre) or less can usually be cleaned by the householder; larger areas, or mould from sewage water, need a professional with mould clean-up experience.
Clean a small area of mould safely
- Check the area is about 1 m² or less and the water source is known.
- Keep children, older people and anyone with asthma out of the room.
- Open windows. Wear an N95 mask, gloves, and goggles without vent holes.
- Mix detergent in warm water in a bucket.
- Scrub hard surfaces (tiles, painted walls, window frames) with a brush or cloth and the detergent water. Work from the outside of the patch inward.
- Rinse with a clean damp cloth. Dry completely with a dry cloth and open air.
- Porous things that are mouldy, such as ceiling boards, carpets and mattresses, may need to be thrown away. Bag them before carrying them through the house.
- Do not paint over mould. Clean and dry first.
- Bleach is not recommended as a routine mould clean-up, and never mix bleach with ammonia or other cleaners: the fumes are dangerous.
- Wash gloves and cloths, or bin them. Wash your hands and face.
- Record the date, the area and the water source. Check again in two weeks.
Prevention
- Fix the leak, the gutter or the crack first
- Open windows and doors for cross-ventilation every day; keep air bricks and vents clear
- Use extractor fans or open windows when cooking and bathing
- Dry clothes outside where possible
- Leave a gap between wardrobes and outside walls
- Wipe bathroom walls and window sills dry
- Keep soil, sand and rubbish off the foot of outside walls
Who cleans?
(a) A patch 1.2 m by 0.6 m on a bathroom ceiling. (b) A patch 2 m by 1.5 m on a bedroom wall after a flood. Work out each area and decide who cleans.
Damp map
Walk your house and mark every damp patch or mould spot on your house sketch. For each, write the likely source from the table and who should fix it.
Check yourself
- What is the key to mould control?
- Up to about what size can a householder clean mould?
- Why must you never mix bleach and ammonia?
Unit 7 · Your location, small business ideas and marketing yourself
Every house needs small jobs done, and many owners live far away. An honest person who turns up, fixes the small things and calls the right expert for the big ones will never be short of work.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 7.1 Choose honest services | lists services within the owner-level limits of this course |
| 7.2 Cost and price | costs a kit and prices a visit with a profit |
| 7.3 Choose a location | names areas with many houses and absent or busy owners |
| 7.4 Market yourself honestly | writes a profile that refers trade work to qualified people |
Range. The trainee's own plan. Evidence. Kit costing; one-page plan; profile.
Ask a qualified expert. Do not sell wiring, structural repair, plumbing inside walls or pest spraying at this level. Refer those jobs to licensed electricians (CEWP), engineers, trained plumbers and licensed pest control. Before you register a business or sign a contract, ask the Assembly, the GRA or a qualified lawyer; this is general information, not legal advice.
Small business ideas (honest ones)
- Monthly home check visits with a written report and photos, for owners who live abroad or in Accra
- Small fixes: washers, cartridges, flappers, blocked sinks, bulbs, plug fuses, hinges, striker plates, lock care
- Damp and mould care: small-area cleaning and prevention advice
- Crack monitoring for owners, with dated records ready for an engineer
- Move-in and move-out checks for landlords and tenants, with dated photos
- Booking and supervising trusted electricians, plumbers and painters on the owner's behalf (Level 3 goes deeper)
Never call yourself an "electrician", "plumber" or "engineer" at this level. Keep a list of certified electricians (check the Energy Commission register), trained plumbers and engineers you trust. If you earn a referral fee, tell the customer.
Location settings that give good returns
- Estates and new residential areas around Takoradi (Anaji, Kwesimintsim, Effia, Apremdo), where many houses are owned by people working away
- Family and compound houses in Sekondi and Takoradi town, where many tenants share facilities
- Coastal towns (Busua, Dixcove, Akwidaa), where salt air and rain wear doors, locks and metal fast, and guesthouses need regular care
- Student hostels near Takoradi Technical University and colleges
- Churches, schools and small offices that have no caretaker
Cost and price
Price a home check visit (all figures are example)
Your tool kit cost GH¢595 (Unit 1). You charge GH¢100 for a monthly check visit with one small fix. Each visit costs you GH¢35 in transport and small parts. (a) Profit per visit? (b) How many visits pay back the kit? (c) With 15 visits a month, what is the monthly profit after the kit is paid for?
Market yourself honestly
- WhatsApp Business: a business profile with your name, area and services, a catalogue and greeting and away messages. Post before-and-after photos with the owner's permission, never showing the house number or the family.
- Google Business Profile: a free listing that helps people nearby find you.
- Signage and cards: "Home check and small fixes · Taps, toilets, sinks, doors, locks, bulbs · Wiring and structural work referred to certified professionals".
- Referrals: landlords, estate caretakers, churches, hardware shops, diaspora family groups.
- Your portfolio: your hub certificate, sample check reports (no private details), photos, written thanks.
Accessibility
Ghana's Persons with Disability Act, 2006 (Act 715) protects the rights of persons with disabilities, including in employment. The Government announced in October 2025 that the share of the District Assemblies Common Fund for persons with disabilities would rise from 3% to 5% from 2026, with each Assembly preparing a budget for it with the local branch of the Ghana Federation of the Disabled. Ask your Assembly how to apply.
Much of this work suits persons with disabilities: check walks and reports, crack monitoring and records, bench work such as cleaning traps and fitting washers, lock care, booking artisans by phone, record keeping. Adjustments that help: a partner for ladder and roof-line work; a trolley or bag on wheels for tools; a bench at wheelchair height for trap and tap work; large-print or audio checklists and a phone camera with zoom for people with low vision; picture job cards and WhatsApp text bookings for deaf workers. Ask the person what works for them.
My plan
- Choose two services from the list.
- Cost your kit and price one visit.
- Choose a location and explain why.
- Write a one-page plan: name, services, customers, prices, and the jobs you will refer.
- List three certified or trained people you can refer to (ask at the hub; check the Energy Commission register for electricians).
Ask three owners
Ask a landlord, a tenant and a church or school caretaker what small jobs go undone in their buildings, and what they would pay for a monthly check visit.
Check yourself
- Name two honest home-maintenance services at Level 1.
- What must your sign or profile never claim?
- Name two adjustments for a worker who uses a wheelchair.
Glossary
| Term | Meaning |
|---|---|
| Competent / Not Yet Competent | The two possible results of a CBT assessment |
| Check walk | A monthly walk around and through a house with a fixed route and a checklist |
| Stop valve | The valve that shuts off the water supply to the house or a fitting |
| Isolating valve | A small valve on the pipe to one tap, toilet or appliance |
| Washer | The rubber disc in a pillar tap that stops the water |
| Cartridge | The part inside a quarter-turn or lever tap that controls the flow |
| Cistern | The water tank of a toilet |
| Flapper | The rubber seal at the bottom of some cisterns that lets water into the bowl when you flush |
| Trap | The bend under a sink that holds water to stop smells; it also catches dirt |
| Auger (snake) | A flexible steel coil turned by hand to clear pipes |
| CEWP | Certified Electrical Wiring Professional, certified by the Energy Commission |
| Consumer unit | The breaker box: the main switch, breakers and RCD |
| MCB | Miniature circuit breaker: switches off a circuit on overload or short circuit |
| RCD | Residual current device: switches off when current leaks to earth |
| Striker plate | The metal plate on the door frame that the latch or bolt goes into |
| Rising damp | Ground water creeping up a wall |
| Condensation | Water from the air settling on a cold surface |
| N95 | A type of mask that filters fine particles such as mould spores |
Logbook
Copy these pages into an exercise book. Your logbook is part of your assessment evidence.
- Unit 1: check walk sheet; key-controls sketch; tool kit list
- Unit 2: meter or tank test; dye test; washer or cartridge change; sink cleared
- Unit 3: bulb change; plug fuse change; list of electrical faults reported
- Unit 4: door survey; hinge repair; lock care visit
- Unit 5: crack records with two dated readings
- Unit 6: damp map; mould clean record; prevention plan
- Unit 7: kit costing; one-page plan; referral list
- Every homework, dated
Self-check quiz
- What are the three key controls in a house?
- Who may do electrical wiring on premises in Ghana?
- How long do you wait in the dye test before checking the toilet bowl?
- A pillar tap drips from the spout. What part usually needs changing?
- Why should cooking oil never go down the sink?
- Name two things you check when you open a plug to change the fuse.
- A breaker trips twice with nothing plugged in. What do you do?
- How do you fix a worn screw hole in a door frame?
- Up to what crack width does the BRE scale call damage "aesthetic"?
- Name two crack shapes that are warning signs.
- Within how many hours should wet materials be dried to stop mould?
- A tap drips 2 litres an hour. How many litres is that in 30 days?
Further reading and sources
Best next reads: the manuals for your taps, toilets and locks; the Energy Commission's list of certified electricians for your region; Home Maintenance Basics Level 2.
What this module does not cover: electrical wiring and testing (see House Electrical Wiring); pipework (Basic Plumbing); painting, tiling, masonry and carpentry as trades; roofs, gutters, termites, septic tanks and seasonal care (Level 2); fire and gas (Home Fire and Gas Safety); appliances (Home Appliance Care); water storage and treatment (Home Water Safety); first aid (First Aid and Community Health Helper).
Every source used in this manual is listed, with links, in the Teacher Copy.