About this module
At Level 1 your skirt fitted. At Level 2 the kaba fits too, the print matches at the zip, and the customer's friends ask who sewed it.
Who it is for. People who have finished Tailoring and Dressmaking (Level 1), or who can show the same skills, including apprentices preparing for a trade test. National Proficiency II covers varied work, mostly routine, under limited supervision.
CTVET status. CTVET lists Fashion Design Technology at National Proficiency I and II. Its unit list was not found online, so this module is not that curriculum. GNTDA apprentices sit a final trade test supervised by the National Vocational Training Institute (NVTI), with practical and written parts.
Why this level matters
The slit and kaba has moved from loose to closely fitted styles: necklines, strapless and strapped tops, shaped slits that follow the body. Makers in the study said fitted styles need proper skill "to mould the garment" and to dress each figure well. Yet 20 of the 25 makers studied still cut freehand, few matched motifs, and few took the back and chest measurements a fitted bodice needs. A tailor who blocks, matches and fits properly stands out at once.
Not repeated here. Garment Making and Industrial Sewing Level 2 teaches pattern grading, a lined jacket, uniforms, industrial machines and batch costing. This course does one customer at a time. Where a skill is already in that course, we point to it.
Bridge from Level 1: what you already know
- Safe table, pins counted back, switch-off routine, the customer's cloth received with a receipt and a photo
- Respect rules; the full women's and men's measurement sets; dated cards in one unit
- Wax print, lining, Kente and fugu; selvedge, grain, bias; motifs and the slit cut across the cloth
- Six hand stitches, shank buttons, hooks; press as you sew; a clean inside
- Why paper first; ease; the beginner skirt draft; a toile; a lined skirt or slit with walking slit; a simple top
- First fitting points; common faults; hems, take-ins, zips, buttons
- Location, extra income, order book, pricing formula, WhatsApp Business, accessibility
Level 1 did not cover a fitted bodice block, darts that follow the bust, princess lines, sleeves drafted to the armhole, shaped slits, shirts with collars and stands, Kente, men's trousers, reading drag lines, restyling, or training apprentices. Level 2 covers all of these.
How the module works
Each unit has learning outcomes, performance criteria, the range and the evidence your assessor needs. You are judged Competent or Not Yet Competent. About 70% of the time is practical. Every unit ends with homework and a short Check yourself quiz.
About the drafts. The block, sleeve, shirt and trouser drafts in this manual are beginner drafts written for this course from common flat-pattern practice and the customer's own measurements. They are not a published drafting system. Every first draft is tested in a toile. Money figures marked example are invented for practice.
Unit 1 · Figures and the personal bodice block
A block is the customer's body on paper. Draw it once, test it once, and every style after it starts right.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 1.1 Read the figure | describes posture and figure points (shoulder slope, bust, back, seat, stomach) on the card |
| 1.2 Take the block measurements | adds armhole depth, side length and bust-point measures to the Level 1 set |
| 1.3 Draft a bodice block | drafts a front and back bodice block with waist darts and a side bust dart |
| 1.4 Test and correct the block | sews a toile, fits it and corrects the paper block |
Range. At least three women of different figures; one man (for the shirt in Unit 3). Evidence. Figure notes; block drafts; toiles; fitting records; corrected blocks.
Ask a qualified expert. Some customers have a medical reason for a figure difference (after surgery, a back condition, pregnancy). Never comment or advise on health; if a customer asks, suggest they see a doctor or nurse. Fit the body you see, kindly and privately.
Read the figure before you draft
Look at the customer from the side and the back, standing naturally. Write one note for each point:
| Point | What to look for | Why it matters |
|---|---|---|
| Posture | Very upright, normal, or leaning forward with round shoulders | Round shoulders need more back length; upright needs less |
| Shoulders | Square, normal or sloping; one lower than the other | Changes the shoulder seam and the armhole |
| Bust | Full, average or small; high or low | Changes dart size and position |
| Back | Broad or narrow | Changes the across-back width |
| Stomach | Flat or full | Changes the front waist and skirt front |
| Seat | Flat or full | Changes the back skirt or trouser length and width |
A university extension guide lists each of these figure types and how to alter a pattern for it: for example, sloping shoulders need the shoulder and armhole seams lowered, a full bust needs the pattern slashed and spread so the darts grow, and a full seat needs width and length added at the back. In Level 2 you draft the block from this customer's numbers, so most of these changes are built in from the start.
Extra measurements for the block
Add these to the Level 1 card. The ways of measuring follow the extension guide.
| Measurement | How |
|---|---|
| Armhole depth | From the top of the shoulder at the armhole, down the back to a cord tied round the chest at underarm level |
| Side length | From the chest cord at the underarm, down the side to the waist string |
| Shoulder to bust point | From the shoulder at the neck to the bust point (already in Level 1) |
| Bust span | Bust point to bust point (already in Level 1) |
| Back width at shoulder blades | About 18 cm down from the neck, armhole to armhole |
Draft a bodice block (beginner draft)
You draft half of the front and half of the back. Use the customer's card: bust (B), waist (W), back length (BL, nape to waist), front length (FL, neck-shoulder point over the bust to waist), shoulder width (SW), neck (N), across back (AB), across chest (AC), armhole depth (AD), side length (SL), shoulder to bust point (SBP), bust span (BS).
Back
- Draw the centre back (CB) line. Mark the nape A at the top and the waist B at BL below.
- Neck: from A, square across N ÷ 6 + 0.5 cm and go up 2 cm. Curve the back neck from A to this point (the neck point, NP).
- Shoulder: the shoulder point is SW ÷ 2 from the CB line and about 4 cm below the level of A (use more for sloping shoulders, less for square). Join NP to the shoulder point.
- Armhole line: from the shoulder point, measure down AD and square across to the CB line. This is the underarm (bust) line.
- Across back: halfway between A and the underarm line, square across AB ÷ 2.
- Bust width: on the underarm line, measure B ÷ 4 + 1.5 cm from CB. This is the back side point.
- Side seam: from the side point, measure down SL to the waist line.
- Waist: on the waist line, the back must be W ÷ 4 + 1 cm wide plus the back dart. Put the remaining extra into a back waist dart about halfway across, up to about 2 cm below the underarm line. If the extra is more than about 4 cm, take some at the side seam too.
- Draw the armhole from the shoulder point, touching the across-back line, curving down to the side point.
Front
- Draw the centre front (CF) line. The front neck is lower: from the top, square across N ÷ 6 + 0.5 cm for the neck point and drop the front neck about N ÷ 6 + 1 cm on the CF line. Curve the neck.
- Bust point: from the front neck point, measure SBP down towards the bust; it sits BS ÷ 2 from the CF line.
- Shoulder: same length and slope as the back shoulder (they must match when sewn).
- Front length: from the neck point, measure FL down over the bust point to the waist.
- Across chest: about 15 cm below the neck point, square across AC ÷ 2.
- Bust width: on the underarm line, measure B ÷ 4 + 1.5 cm from CF.
- Side bust dart. The front side seam must be the same length as the back side seam (SL). Because the front is longer over the bust, the extra length at the side is taken in a side bust dart pointing at the bust point and ending about 2–3 cm before it.
- Front waist dart: under the bust point, taking the front waist to W ÷ 4 + 1 cm. End the dart point 2–3 cm below the bust point.
- Draw the front armhole: deeper curve than the back.
- Check: front and back shoulders the same length; front and back side seams the same length; armhole smooth where front meets back.
Ease in this block: 6 cm at the bust (1.5 cm on each quarter) and 4 cm at the waist. This gives a close-fitting block; add more ease for loose styles.
Block numbers for Efua (example customer)
Efua's card: bust 96, waist 78, neck 36, shoulder width 38 cm.
- What is the bust width of each front and back quarter on the block?
- What waist width does each quarter need before darts?
- What is the neck width from the centre line?
- How far is the shoulder point from the centre back line?
Test the block
- Cut the block in calico with 2 cm seam allowances. Mark the bust point, darts and the centre lines with a felt pen.
- Sew darts and seams with a long stitch; leave the CB open.
- Fit on the customer over light clothing; pin the CB closed.
- Check: centre lines straight down the middle; side seams straight; bust darts end before the bust point; no pulling across the back; armhole not cutting under the arm; shoulder seams sit on top of the shoulder.
- Mark changes. Use the three ways to change a pattern from Level 1 (fold out, slash and spread or overlap, redraw), keeping the grain line and matching every joining piece.
- Copy the corrected block onto card or strong paper. Write the customer's name, card number and date. File it.
Your blocks are your business. A regular customer's tested block saves you a fitting on every new order. Store blocks flat or rolled in labelled tubes, away from damp. Re-measure the customer at least once a year.
Block three customers
- Write figure notes for three women.
- Take the extra block measurements for each.
- Draft three bodice blocks.
- Sew and fit a calico toile for each; record every change.
- Correct the paper and copy each block onto card.
A block for yourself
Ask a partner to measure you. Draft your own bodice block. Write where you think the fit will be hard and why.
Check yourself
- Why is the front bodice longer than the back, and where does the extra length go?
- What must be equal when you check a block?
- Name two figure points you note before drafting.
Unit 2 · Kaba and slit made to measure
A good kaba and slit looks simple. It is not. It is darts in the right place, motifs in the right place and a slit that lets her walk.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 2.1 Design from the block | turns the bodice block into a darted kaba and a princess-line kaba with peplum |
| 2.2 Draft a sleeve | drafts a fitted sleeve to the armhole and adapts it to a puff or cap sleeve |
| 2.3 Draft a shaped slit | adapts the straight skirt into a shaped (mermaid) slit with walking room |
| 2.4 Match and finish | plans motifs, matches them at zip and seams, lines or underlines, and finishes the inside |
Range. Two complete kaba and slit outfits for real customers in wax print. Evidence. Patterns; layout plans; fitting records; finished outfits; photos.
Ask a qualified expert. Boning, wires and tight styles can hurt if fitted badly; if a customer has pain or breathing trouble in a tight style, loosen it at once and suggest she see a doctor or nurse if it continues. Never sew a garment so tight it harms the wearer.
What the study found, and what to do instead
| Found in Ghanaian shops | Do this instead |
|---|---|
| Side seam allowances up to 7 cm, closed, spoiling the fit | Even 1.5 cm allowances (2–2.5 cm only where you plan to let out), finished flat |
| Kaba cut without shaping the side seams; shaping done after darts and panels were sewn | Shape on the paper pattern from the block, then fit the toile |
| Motifs poorly aligned; cloth wasted in freehand cutting | Plan the layout on paper first (below) |
| Underlining handled as one with the outer, faster than full lining | Choose consciously: underlining for structure and quick alterations, full lining for a clean inside |
| Little attention to the wrong side | Finish every seam; press at every stage |
From block to kaba
A darted kaba (the simplest fitted kaba):
- Trace the front and back blocks. Add the kaba length below the waist (for example 15–20 cm for a hip-length kaba, measured on the customer).
- Below the waist, continue the side seams out to the hip measurement ÷ 4 + 1.5 cm at the hip line.
- Continue the waist darts below the waist as long diamond darts, ending about 12 cm below the waist.
- Shape the neckline to the chosen style (round, V, square, sweetheart). Draft a matching facing 5 cm wide.
- Add a centre-back zip opening, seam allowances and labels.
A princess-line kaba with peplum:
- On the front block, draw a curved line from the armhole (about one third down from the shoulder) through the bust point to the waist dart. On the back, from the armhole through the back dart.
- Cut along the lines. The darts disappear into the new seams: this is how princess seams shape the body.
- Smooth the curve over the bust on both pieces; mark notches above and below the bust so they match.
- Peplum: draft a flared band. Measure the waist of the finished bodice; draw an arc of that length; add flare by cutting the band into four and spreading the hem (for example 5–8 cm at each cut).
Draft a sleeve to the armhole
The sleeve must fit the armhole you drafted. Measure the front and back armhole curves on the block with the tape on its edge.
- Sleeve width at the underarm: round arm + 5 cm ease.
- Cap height: measure on the customer, or start with about one third of the total armhole length, and test it.
- Draw a vertical centre line (the grain line). Draw the cap height at the top; square across at the base for the underarm width.
- Curve the cap: the back half fuller than the front. Mark the shoulder notch at the top and front and back notches.
- Check: the cap curve should be about 2–3 cm longer than the armhole for a smooth set-in sleeve with a little ease. Much more and it will pucker; less and it will pull.
- Sleeve length: from the card; taper to the wrist (or the chosen length) plus ease.
Puff sleeve: cut the sleeve pattern from cap to hem into four, spread the top (for example 3–5 cm per cut) and gather the extra into the armhole. Cap sleeve: use only the top part of the cap, finished with a facing or binding.
A university guide's sleeve changes apply when the sleeve does not fit: slash and spread for a large upper arm, fold out for a small arm, and adjust the bodice side seams by half the difference.
From straight skirt to shaped slit
- Start from the Level 1 skirt pattern, tested on this customer.
- Mark the knee line from the card (waist to knee).
- Mermaid shape: take in each side seam 1–3 cm at the knee (test walking), then flare out below the knee with an added flare at the side seams or with godets (triangular inserts) at the seams.
- Walking room: a fitted slit still needs a back vent or a split, or enough flare at the hem. Test: she must walk and climb a step.
- Zip: usually centre back or side. Use an invisible zip for a clean line if available, and fit the slit's zip to line up with the kaba's motifs.
- Lining or underlining: a fitted slit in wax print is commonly underlined or lined so it slides and holds its shape.
Plan the layout and match motifs
Most wax-print motifs and borders run across the cloth, and the selvedge of a slit sits at waist and ankle. Before you cut:
- Lay out all pattern pieces on paper marked to the cloth width.
- Lay the cloth flat, right side up. Find the main motif. Decide where it falls on the kaba front (centred, not on the bust point).
- Cut the kaba front on the fold or as one piece, with the motif centred.
- Lay the back pieces so the motifs meet across the zip: fold under the seam allowance of the first back piece, lay it on the cloth, and slide it until the print matches; then cut the second piece.
- Match at the side seams where you can, at least at the hip line.
- For one-way prints, every piece points the same way.
- Plan the slit: border along the hem if there is one; motifs placed so a large circle does not sit on the seat.
Does it fit the cloth? (example)
The customer brings 6 yards (548 cm) of wax print, 116 cm wide. Your layout needs: slit 105 cm, kaba front and back with motif matching 90 cm, sleeves 50 cm, facings and peplum 40 cm, head wrap 60 cm.
- What length does the layout use?
- How much cloth is left?
- The customer also wants a matching bag that needs 45 cm. Can you make it?
Order of work for a kaba and slit
- Cut and mark all pieces; interface the facings.
- Kaba: sew darts or princess seams; press over the ham; sew shoulders; sew side seams.
- Insert the zip at centre back, motifs matched.
- Attach the facing or lining at the neck; under-stitch so it rolls inside.
- Set the sleeves: gather the cap slightly between the notches, pin at the notches, sew with the sleeve on top, press the seam towards the sleeve.
- Peplum, then the hem.
- Slit: darts, seams, zip, lining or underlining, waist finish, vent, hem.
- Fitting 2 with sleeves tacked in and the hem pinned (see Unit 6).
- Finish: blind hems, hooks and eyes, threads trimmed, final press with a press cloth.
Two kaba and slit outfits
- From a customer's tested block, draft a darted kaba, a fitted sleeve and a shaped slit.
- For a second customer, draft a princess-line kaba with peplum and puff sleeves.
- Plan both layouts on paper, with motif placement sketched.
- Cut, sew, fit twice, and finish both outfits.
- Photograph them on the customers (with permission) and file the patterns.
Study three kaba
Look at three kaba styles (in church, a magazine or online). For each, sketch the seam lines you can see, and write how you would get that shape from the block.
Check yourself
- Where do the darts go in a princess-line kaba?
- How much longer than the armhole should a sleeve cap be, and why?
- How do you match motifs across a centre-back zip?
Unit 3 · African print shirts and men's native tops
A man notices two things on a shirt: the collar and whether the print runs straight down the front.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 3.1 Draft a shirt | drafts a men's shirt (front, back, yoke, sleeve, collar and stand) from measurements |
| 3.2 Sew a collar and stand | sews a collar with a stand, interfaced, with even points |
| 3.3 Match the print | places and matches the print across the front opening and pockets |
| 3.4 Make a native top | adapts the shirt to a long native top (kaftan-style) and finishes the neck and side slits |
Range. One short-sleeved print shirt with collar and stand; one long native top. Evidence. Patterns; garments; fitting record; photos.
Ask a qualified expert. Fusible interfacing glue melts under a hot iron; use a press cloth and good ventilation, and keep children away from the ironing area. If you burn your skin, cool it under running water and see a doctor or nurse for anything large or blistered.
The men's shirt draft (beginner draft)
From the card: chest (C), stomach (S, use if larger than chest), neck (N), shoulder (SH), back length to waist and to shirt hem (L), sleeve (SL), round arm (RA), wrist (WR).
Ease. A comfortable men's shirt has much more ease than a fitted kaba. Start with about 16–20 cm at the chest in total (4–5 cm on each quarter), more for a loose native top. Ask how he likes it: slim, regular or loose.
- Back: CB line; length L. Neck width N ÷ 6 + 0.5 cm; neck rise 2 cm. Shoulder point SH ÷ 2 from CB, about 4 cm lower than the neck level. Chest width C ÷ 4 + 4.5 cm (regular fit). Armhole depth from the card plus 2–3 cm (shirts sit lower than a block).
- Yoke: draw a line across the back about 8–10 cm below the neck. The top part becomes the yoke (cut double). Add 2–3 cm to the lower back at the CB for a box pleat if he wants room to move.
- Front: CF line; front neck drops about N ÷ 6 + 1.5 cm. Chest width C ÷ 4 + 4.5 cm. Shoulder joins the yoke.
- Button stand: add 1.5–2 cm beyond the CF for the button overlap and a 3–4 cm placket (or fold-back facing).
- Sleeve: like the kaba sleeve, but with a lower, flatter cap (about 12–15 cm for a regular shirt) so he can lift his arms. Width at underarm RA + 8–10 cm.
- Collar stand: a curved band the length of the neckline (front and back) plus the button stand, 3–4 cm high.
- Collar: the length of the stand from CF to CF, 4–6 cm wide at the back, with the point shape he chooses.
- Mark the buttons: first on the stand, then about 8–9 cm apart down the front.
Sew the collar and stand
Free tutorials agree on the main steps, and a magazine guide adds that the stand gives the collar its height and the collar should curve round the neck without puckering:
- Interface one collar and one stand piece.
- Sew the two collar pieces round the outer edge; trim, clip the points, turn, press. Top-stitch if the style needs it.
- Sandwich the collar between the two stand pieces; sew along the top curve; turn and press.
- Sew the outer stand to the shirt neckline, right sides together, matching the CB notch and the front edges.
- Turn under the inner stand, pin it to cover the seam, and edge-stitch it from the inside or topstitch from the outside.
- Check: both points the same length; the stand meets the front edge exactly; no pucker at the back neck.
Matching the print down the front
Customers judge a print shirt on its front. Plan before you cut:
- The centre front of the shirt sits on a line of the print: the centre of a motif, or between two motifs
- Both fronts must show the same level of the print, so motifs line up across the buttons when it is closed
- The pocket is cut so its print matches the print underneath it: lay the pocket pattern on the cut front, trace the print, then find the same spot on the cloth
- Sleeves in a matching pair; the yoke centred on a motif
- One-way prints: everything pointing up
Matching takes more cloth. Allow an extra half to one repeat of the print when you estimate.
Men's native tops
Many men order long tops for church, weddings and Fridays: kaftan styles, long-sleeved "native" tops with a mandarin collar, often with embroidery. Grooms at recent Ghanaian weddings have worn tailor-made kaftans and agbada, sometimes with embroidery. Adapt the shirt:
- Lengthen the shirt to the knee or below; widen the side seams from the chest down for walking room.
- Leave side slits at the hem, 20–30 cm, finished with a facing or a mitred hem.
- Use a mandarin collar (stand only) or a faced round neck with a short front opening.
- Add a matching trouser (Unit 5) for a full outfit.
- Embroidery: if you send work out to an embroidery machine operator, mark the position on the cut piece and agree the design and price in writing.
Fugu (batakari). Fugu is sewn from handwoven northern strips. Treat the strips like Kente (Unit 4): plan cuts, stabilise the edges, and keep the weave's strength. Fugu Wednesdays bring weekly demand.
Shirt numbers for Yaw (example customer)
Yaw's chest is 104 cm and his stomach 100 cm. He wants a regular fit.
- What chest width does each front and back quarter get with 4.5 cm ease each?
- What is the total ease at the chest?
- His neck is 40 cm. What is the neck width from the centre line?
Shirt and native top
- Draft a shirt for a real male customer and test the body and sleeve in calico.
- Plan the print layout; cut with the CF on a motif line and a matched pocket.
- Sew the shirt with a yoke, a collar and stand, buttons and buttonholes, and finished seams (flat-fell or overlocked).
- Adapt the pattern into a long native top with side slits and a mandarin collar; sew it.
- Fit, finish and photograph both.
Shirt check
Look at three print shirts worn by men you know. For each: does the print match down the front? at the pocket? Is the collar even? Write what you would do better.
Check yourself
- Why does a shirt sleeve have a lower, flatter cap than a kaba sleeve?
- Which piece do you sew to the shirt neckline first, the collar or the stand?
- How do you make a pocket's print match the shirt?
Unit 4 · Kente styles
Kente is someone's month of weaving and a family's pride. You cut it once.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 4.1 Respect the cloth and the law | explains the Kente geographical indication and never mislabels cloth |
| 4.2 Plan the cut | plans every cut on paper around the strips and blocks of pattern before touching the cloth |
| 4.3 Stabilise and sew | stabilises cut edges, sews and finishes seams on handwoven cloth without bulk or fraying |
| 4.4 Make a Kente outfit | makes a Kente kaba, a Kente-trimmed garment or a groom's piece, lined, for a real or practice customer |
Range. Practice on offcuts or damaged strips; one real or practice outfit. Evidence. Cut plans; stabilised samples; outfit; customer's cloth record.
Ask a qualified expert. Calling cloth "Kente" when it is not authentic Kente may break the geographical indication rules. This is general information, not legal advice: ask a qualified lawyer or the Registrar-General's Department before you label, advertise or sell anything as Kente.
The Kente rule
Kente became Ghana's protected geographical indication in 2025, launched in Accra on 30 September 2025. A Book of Specifications covers thread counts, loom types and traditional methods; the communities are Bonwire and Adanwomase in Ashanti, and Agotime Kpetoe, Agbozume and Tafi Atome in the Volta Region. Factory-printed imitations are not authentic Kente, and each authentic piece is to carry a QR code, with a public registry of certified weavers planned. Ghana's first geographical indications journal, published in March 2026 under the Geographical Indications Act, 2003 and its 2020 regulations, lists KENTE. UNESCO inscribed traditional Kente weaving on its intangible cultural heritage list in December 2024.
For a tailor this means: call printed cloth "Kente-pattern print", never "Kente"; ask customers where their Kente came from; and look for the QR code as it comes into use.
How Kente is made, and why it matters to your scissors
Kente is woven on a narrow double-heddle loom as long narrow strips, which are then sewn together edge to edge. A weaver's account describes joining the strips right sides together with a very narrow seam along the selvedges, then opening and pressing it, so the joins do not fray. So:
- Along a strip (parallel to the joins) you are cutting with the selvedges: the edge is stable.
- Across the strips you cut through every join and every woven block: the cut edge frays fast and the joins can open.
Plan the cut
- Unfold the whole cloth in front of the customer. Count the strips, measure length and width, photograph it, note any loose joins. Write it on the cloth record.
- Ask what the cloth is for and whether any part must stay uncut (some families want the full cloth kept for wearing as a wrap later).
- Make a full toile first. Never cut Kente from an untested pattern.
- Plan on paper: draw the cloth to scale with its strips and pattern blocks. Lay the pattern pieces on the drawing so blocks line up across the body: at the centre front, across the bust, at the side seams.
- Prefer simple lines with few seams: a handwoven guide advises patterns with simple lines. Let the cloth be the design.
- Where possible, put hems and edges along a selvedge.
Stabilise, cut and finish
A sewing guild's advice for handwoven cloth (a foreign source) is to zigzag on the cutting lines before cutting so the edges stay stable, to finish seam edges by serging, binding, zigzagging or turning under, and to test on scraps first.
- Chalk the cutting line. Sew two rows of small straight stitch or a narrow zigzag just inside the seam allowance, across every join you will cut.
- Cut between the stitching and the chalk line.
- Overlock or bind the cut edges at once; do not leave cut Kente lying overnight.
- Strip joins are bulky. Press them open with a press cloth; grade seam allowances where a seam crosses a join.
- Interfacing or underlining: a lightweight underlining or fusible tested on a scrap holds the strips in shape. Test first: some threads shrink or shine under heat.
- Line every Kente garment. The lining protects the joins and the skin.
- Press with a press cloth, never direct heat on metallic or rayon threads.
Kente outfits you will be asked for
At Ashanti weddings, the bride's Kente kaba and slit is often matched with the groom's Kente cloth. Recent Ghanaian brides have worn corseted Kente gowns, and grooms Kente with tailored suits or kaftans. These are lifestyle reports, not a standard. Common orders:
- Kente kaba and slit for engagement, weddings, naming and festivals
- Kente-trimmed outfits: a wax-print kaba with Kente panels at the neck, bodice or peplum; a jacket with Kente lapels
- Groom's pieces: a Kente waistcoat, a jacket with Kente detail, or a native top with Kente yoke; Level 3 teaches full suits
- Stoles and sashes for graduations and church: simple strips finished at the ends
How many strips? (example)
A customer's Kente cloth has 20 strips, each 10 cm wide, sewn together. Each strip is 280 cm long.
- How wide is the cloth?
- Your kaba front needs 56 cm across. How many full strips is that, and what is left over?
- Why might you choose 50 cm (5 strips) or 60 cm (6 strips) instead of 56 cm?
Kente practice and outfit
- On a Kente offcut, practise: stay-stitch across joins, cut, overlock; compare with an unstabilised cut left for one hour.
- Press a strip join open; grade a crossing seam.
- Draw a scale plan of a real or practice Kente cloth and place a kaba and slit pattern on it.
- Make a Kente kaba (or a Kente-trimmed wax-print kaba), lined, after a toile fitting.
- Fill in the cloth record before and after: strips received, strips used, leftovers returned.
Talk to a weaver or seller
Speak to a Kente weaver or seller (in person or by message). Ask how they want tailors to treat their cloth, and how buyers can tell authentic Kente. Write three things you learned.
Check yourself
- What is the difference between cutting along a Kente strip and across it?
- What do you do before cutting across the joins?
- Can you advertise a printed copy as Kente?
Unit 5 · Men's trousers made to measure
A trouser that fits at the seat and the rise is worn every week. One that does not is never worn again.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 5.1 Draft trousers | drafts front and back trouser patterns from waist, seat, outseam, inseam, crotch depth, thigh, knee and bottom |
| 5.2 Fit the rise and seat | fits a toile and corrects the crotch curve, seat and waist |
| 5.3 Sew a bespoke trouser | sews fly zip, waistband, side or slant pockets, back pocket, belt loops and hem to standard |
Range. Two pairs for different male customers; one may be native-wear trousers with a drawstring or elastic. Evidence. Patterns; fitting records; finished trousers.
Ask a qualified expert. Some men need trousers adapted for a disability, a stoma bag, a brace or after surgery. Fit kindly and privately, ask what they need, and for any health question suggest they ask their doctor or nurse.
What Garment Making already taught
Garment Making and Industrial Sewing Level 2, Unit 3 teaches a basic trouser with fly, waistband and pockets for uniforms. Here you draft to one man's measurements and fit the rise and seat for him.
Why the back is different
The back trouser needs more room than the front, because the seat sticks out further than the front of the body; that is why the back crotch extension is longer. A university guide's pants changes show it: a full seat needs the back slashed and spread, with the crotch seam and inseam made longer; a full stomach needs extra at the centre front and a longer front crotch seam.
Draft the trousers (beginner draft)
From the card: waist (W), seat (S), outseam (OS), crotch depth (CD), knee, bottom (hem width), thigh.
Front
- Draw a vertical crease line (the grain line). Mark the waist level at the top.
- Down the line, mark the crotch line at CD + 1 cm, the seat line about one third of the way up from the crotch line, the knee line halfway between the crotch line and the hem plus 5 cm, and the hem at OS.
- On the seat line, the front width is S ÷ 4 + 1 cm (about half each side of the crease, a little more towards the side seam).
- Front crotch extension: from the centre front at the crotch line, extend about S ÷ 16. Curve the front crotch from the seat line to this point.
- Waist: W ÷ 4 + 0.5 cm, plus a pleat or a dart if he wants one.
- Knee and hem: half the knee width and half the bottom width each side of the crease. Join smoothly from the crotch point to the knee and hem (inseam), and from the hip to the knee and hem (side seam).
Back
- Trace the front. On the seat line the back width is S ÷ 4 + 2 cm.
- Back crotch extension: longer than the front, about S ÷ 8, and the back crotch line drops about 1 cm below the front.
- Tilt the back centre seam: raise the back waist at the centre by about 2–3 cm and slant the centre back seam so the seat has room to bend and sit.
- Waist: W ÷ 4 + 0.5 cm plus one or two back darts.
- Knee and hem: each about 2 cm wider than the front.
- Check: front and back inseams are the same length from crotch to knee (the back may be slightly shorter, eased in); side seams match.
These are starting proportions to test, not fixed rules. Different drafting systems use different crotch extension amounts; that is why every draft is tested.
Fit the toile
He sits, walks, bends and climbs a step in the toile. Check:
- Rise: the crotch does not pull up (too short) or hang low (too long)
- Seat: no tight lines across, no loose folds under the seat
- Waist: sits where he likes it, no gap at the back when he sits
- Front: the crease hangs straight down the middle of the leg
- Thigh: room to sit without pulling
- Length: the hem touches the shoe as he likes, with or without a small break
Fix the pattern by the university guide's methods: spread or fold the back for seat changes, lengthen or shorten the crotch seams, keep the grain.
Sew the bespoke trouser
- Mark the crease line on both legs with a tack.
- Pockets first: slant or side pockets in the front, a jetted or patch pocket at the back.
- Fly zip: on the left front for men's trousers (the common way), with a fly guard on the right.
- Sew the inseams and side seams; press open.
- Sew the crotch seam from front to back, twice for strength, or reinforce with a second row.
- Waistband: interfaced, with a hook and bar; belt loops sewn into the waist seam.
- Hem: on the man in his shoes; blind-stitch; press the crease from hem to waist with a damp press cloth.
Trouser numbers for Kwame (example customer)
Kwame's seat is 104 cm and waist 88 cm.
- What is the front width at the seat line?
- What is the back width at the seat line?
- What are the front and back crotch extensions in this draft?
- What is the front waist width before any pleat or dart?
Two pairs
- Draft trousers for two men of different figures (for example one with a full seat or full stomach).
- Sew a calico toile for each; fit sitting, walking and bending; correct the pattern.
- Sew one pair in suiting or cotton twill with fly, waistband, pockets and loops.
- Sew one native-wear trouser to match the Unit 3 top (drawstring or elastic waist, side pockets).
Check his favourite trousers
Ask a man at home for his best-fitting trousers. Measure the waist, seat, front rise, back rise, thigh, knee, bottom and outseam of the garment. Compare with his body measurements. Write the ease at each point.
Check yourself
- Why is the back crotch extension longer than the front?
- What three things does a man do in the toile before you approve it?
- Which side does the fly usually go on men's trousers?
Unit 6 · Fit problems, alterations and restyling
Wrinkles point to the problem. Learn to read them and you can fix any garment.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 6.1 Read the wrinkles | names the cause of pulling, sagging and folding lines on a garment |
| 6.2 Run two fittings | runs a first and a second fitting, records changes and transfers them to the block |
| 6.3 Do complex alterations | resizes a kaba or trousers up or down, re-sets a sleeve, shortens from the shoulder |
| 6.4 Restyle | turns an old outfit into a new style with the customer's agreement |
Range. Trainees' own garments and customers' garments. Evidence. Fitting records; altered and restyled garments; before and after photos.
Ask a qualified expert. When you alter a costly or sentimental garment (a wedding Kente, a parent's old cloth), agree in writing what you will do and that cutting cannot be undone. For disputes, keep records; this is general information, not legal advice, so ask a qualified lawyer before you agree to replace anything.
Read the wrinkles
| What you see | What it usually means |
|---|---|
| Pulling lines pointing to a point (bust, seat, upper arm) | Too tight there: needs more width or length |
| Sagging folds hanging below a point | Too loose there, or too long above it |
| Diagonal lines from neck to underarm | Shoulder slope wrong (square or sloping shoulders) |
| Horizontal folds across the upper back | Back too long for her posture (very upright), or sway back |
| Collar standing away at the back neck | Back neck too long; round shoulders need more back length |
| Sleeve twisting forward or back | Sleeve set in at the wrong point; move the shoulder notch |
| Smile lines at the crotch front | Front crotch too short or tight |
| Folds under the seat | Back too long below the seat; flat seat |
A university guide gives the pattern fix for each figure: for example, round shoulders need the back slashed and spread with a neck dart, sloping shoulders need the shoulder and armhole lowered, a sway back needs a fold taken out above the waist on the bodice back and below the waist on the skirt back, and a full stomach needs the front skirt slashed and spread with the waist curving up. The guide's general rules: alter the pattern before cutting, keep grain lines and centre lines on the straight grain, keep the style lines and the ease, change every matching piece, pin-fit after altering, and re-check measurements over time.
Two fittings
Fitting 1 (tacked). Body pieces tacked together, sleeves tacked or pinned, zip pinned. Check the fit points from Level 1 plus: bust darts end at the right place, armhole not cutting, sleeve hangs straight, back neck lies flat.
Fitting 2 (nearly finished). Seams sewn, zip in, sleeves in, lining in, hem pinned. Check the hem level in her shoes, sleeve length, closure, and how she moves.
Write both fittings on the record card and the block. Book Fitting 2 when you book Fitting 1.
Bigger alterations
- Resize a kaba down: take in at side seams and princess seams evenly, never only at the sides (the bust shaping moves). Re-check the armhole.
- Resize up: use the seam allowances; where there is not enough, add a panel in contrasting or matching cloth at the side seam or under the arm, and present it as a style.
- Shorten a sleeve with a cuff or vent: shorten from the top (re-set the cap) to keep the cuff detail.
- Shorten a jacket or dress from the shoulder: lift at the shoulder seams to fix a long bodice or a gaping neck; re-shape the armhole.
- Trousers: let out or take in at the centre back seam and waistband; taper legs from the knee down.
Restyling old outfits
Customers often have old kaba and slits that no longer fit or no longer look current. A newspaper feature encouraged people to restyle old kaba and slits, and described dressmakers re-sewing used clothes into new styles sold for about GH¢20–100 each in 2018. Ideas:
- Turn a loose old kaba into a fitted peplum top with new darts or princess seams
- Turn a long slit into a knee-length skirt and a matching bag
- Add a new sleeve style or a contrasting panel
- Combine two old outfits in matching colours into one new dress
- Children's wear from the best parts of an adult outfit
Agree the new style with a sketch and a price before you cut. Take a "before" photo.
Alter or restyle? (example prices)
A customer brings a kaba and slit made two years ago. It is 4 cm too tight at the bust and the waist, and she wants it more modern. Option A: let out (only 1 cm allowance each side) at GH¢40. Option B: add side panels in a plain matching cloth and new puff sleeves at GH¢120 plus GH¢30 cloth. All prices are examples.
- Can option A give her 4 cm more at the bust?
- What is the total cost of option B?
- Which would you advise, and why?
Fit, alter, restyle
- Read the wrinkles on three garments worn by partners; write the cause and the fix for each.
- Run Fitting 1 and Fitting 2 on your Unit 2 outfit; record both.
- Do one resize (up or down) and one sleeve re-set on real or donated garments.
- Restyle one old outfit into a new style with a "before" and "after" photo.
A wrinkle diary
For one week, notice one fit problem a day on clothes you see (without photographing people). Write the wrinkle, the cause and the fix.
Check yourself
- Pulling lines point at the seat. What does that tell you?
- Why do you resize a princess kaba at the princess seams as well as the side seams?
- What do you agree before you restyle an outfit?
Unit 7 · Prices, apprentices and growing your name
A busy tailor is not always a rich tailor. Count your hours, price your skill, and train people well.
Competency standard
| Learning outcome | Performance criteria — the trainee… |
|---|---|
| 7.1 Build a price list | prices each style from timed work, materials and overheads |
| 7.2 Plan capacity | works out how many orders a week the shop can finish and plans the Christmas rush |
| 7.3 Train an apprentice | writes a simple training plan and supervises an apprentice safely |
| 7.4 Grow your name | builds a portfolio, uses WhatsApp Business and a Google listing, joins the trade association |
| 7.5 Plan for access | lists adjustments that let customers and workers with disabilities use the shop |
Range. The trainee's own shop or a real shop. Evidence. Timed work sheets; price list; capacity plan; training plan; portfolio.
Ask a qualified expert. Taking on apprentices or workers brings duties under labour law, and running a shop brings tax duties. This is general information, not legal advice: ask a qualified lawyer or the Labour Department about apprentice agreements, and check with GRA or a qualified accountant about tax. Level 3 covers both in full.
Time your work first
You cannot price what you have not timed. For one month, write the hours each order takes, stage by stage: drafting, cutting, sewing, fittings, finishing.
| Style (example times) | Hours |
|---|---|
| Straight skirt | 3 |
| Simple top | 2.5 |
| Darted kaba and slit, lined | 7 |
| Princess kaba with peplum and puff sleeves, shaped slit | 10 |
| Men's print shirt with collar and stand | 4 |
| Long native top and trousers | 9 |
| Kente kaba and slit, lined | 14 |
These times are examples for practice. Use your own timed numbers.
Build a price list
Use the Level 1 formula: price = (materials + time + overheads) ÷ (1 − margin).
Price three styles (example figures)
Your hourly rate is GH¢18. Overheads (rent, power, Assembly fee, machine upkeep) average GH¢4 an hour of work. Your margin is 25%. Materials: darted kaba and slit GH¢35; men's print shirt GH¢15; Kente kaba and slit GH¢60. Use the example times above. All figures are examples.
- What is the cost and the price of a darted kaba and slit?
- Of a men's print shirt?
- Of a Kente kaba and slit?
- Round each price up to the nearest GH¢5 for the price list.
A 2021 report gave GH¢100–120 for a kaba and slit in Tema. Check what tailors near you charge now; your price list must make sense for your customers and pay your hours.
Plan your capacity
Weekly hours available: for example, 8 hours a day × 6 days = 48 hours, minus about 8 hours for alterations, buying and fittings = 40 hours of sewing.
At 7 hours a darted kaba and slit, that is fewer than 6 a week by yourself. Before Christmas, demand rises and tailors work late; people sue or refuse when a promised date is missed. So:
- Open a Christmas list in October with a closing date for orders.
- Count the hours in the list every week; stop when full.
- Ask for cloth and deposits early; a late cloth is a late dress.
- Plan apprentice help on simple stages (cutting linings, overlocking, hand finishing).
Train an apprentice well
Most Ghanaian tailors learned through apprenticeship. The slit-and-kaba study found that many shops relied on unpaid trainee apprentices as their main workers, and that this hurt quality and standard procedures. The National Apprenticeship Programme aims to train over 500,000 young people over five years, with 45% women and at least 5% persons with disabilities; in the Western North Region, trainees were attached to master craftspersons in fields including dressmaking for six to twelve months. The Youth Employment Agency runs a 12-month apprenticeship for micro and small seamstresses and tailors.
A simple training plan:
- Month 1–2: safety, tools, hand stitches, pressing, machine control; no customer cloth yet
- Month 3–4: measuring with the master watching; cutting linings and toiles; overlocking
- Month 5–6: sewing skirts, slits and simple tops from the master's patterns
- Month 7–9: drafting from cards; fittings with the master; shirts and trousers
- Month 10–12: a full outfit from order to delivery; preparation for the trade test
- Each month: a written record of skills learned and signed by both
- Every task: show, do together, do alone while watched, then check
GNTDA graduates in Sege marked the end of their training with a fashion show of dresses they had made as their practical assessment. Plan a final show or display for your apprentices too.
Join and use the trade association
The Ghana National Tailors and Dressmakers Association trains and graduates apprentices, organises trade tests with NVTI, and has worked with the Ghana Standards Authority on textile and garment standards and certification. The Office of the Registrar of Companies has held a business registration clinic for GNTDA members. Find your local zone and attend meetings.
Grow your name
- Portfolio: photograph every outfit on the customer (with permission), front, side and back, plus close-ups of the matched print and the inside finish.
- WhatsApp Business: catalogue with styles and starting prices; labels such as "fitting booked" and "ready to collect"; quick replies for your price list and opening hours.
- Google Business Profile: free listing with address, hours, photos and reviews on Search and Maps.
- Label: a sewn-in label with your shop name in every garment.
- Social media: small Ghanaian fashion firms market mostly through WhatsApp, Instagram and Facebook.
Location settings that give good returns
- Near cloth sellers and markets, churches and offices; in Takoradi, busy areas such as Market Circle
- A private fitting room with a mirror and a curtain
- Good light for matching prints
- A safe, lockable store for customers' cloth and Kente
- Power back-up for the Christmas rush
- A step-free entrance
Accessibility
Ghana's Persons with Disability Act, 2006 (Act 715) requires services to the public to be accessible. Workable tasks for workers with disabilities include drafting, cutting at a seated table, machine sewing (hand-controlled machines exist for wheelchair users), hand finishing, pressing at a lowered board, and customer records. Deaf machinists work in Ghanaian factories with sign-language support. For customers: a step-free door, a fitting room big enough for a wheelchair and a helper, written order cards for deaf customers, and large print for low vision. The Assemblies' disability fund rose from 3% to 5% in 2026, and the Sekondi-Takoradi Assembly has given industrial sewing machines to persons with disabilities.
Business pack
- Time every order for four weeks and fill in your own times table.
- Build a price list for eight services using the formula.
- Write a capacity plan for a normal week and for December.
- Write a 12-month apprentice training plan and a monthly skills record sheet.
- Update your WhatsApp Business catalogue and draft a Google Business Profile.
Ask three tailors
Ask three tailors in your area what they charge for a kaba and slit, a shirt and an alteration, and how long they take. Compare with your price list and write what you will change.
Check yourself
- Why must you time your work before setting prices?
- How do you stop the Christmas rush making you late?
- What did the slit-and-kaba study find about relying on unpaid apprentices?
Glossary
| Term | Meaning |
|---|---|
| Block | A basic tested pattern made from one customer's measurements |
| Collar stand | The band between the shirt neckline and the collar that gives it height |
| Crotch extension | The part of a trouser pattern that goes between the legs; longer at the back |
| Fitting 1, Fitting 2 | The tacked fitting and the nearly finished fitting |
| Geographical indication | A legal mark showing a product's origin and qualities, such as Kente |
| Godet | A triangle of cloth set into a seam to add flare |
| Peplum | A short flared band at the waist of a kaba |
| Princess seam | A curved seam from the armhole or shoulder through the bust point, replacing darts |
| Rise | The length of the crotch seam from waist to crotch, front or back |
| Sleeve cap | The curved top of a set-in sleeve |
| Stay-stitching | Stitching inside the seam line to stop a cut edge stretching or fraying |
| Underlining | A layer cut like the outer cloth and handled as one with it |
| Yoke | A shaped piece across the shoulders of a shirt |
Logbook
Copy these pages into an exercise book. Your logbook is part of your assessment evidence.
- Unit 1: figure notes; three blocks with toile records
- Unit 2: kaba, sleeve and slit patterns; layout plans; fitting records; two outfits
- Unit 3: shirt pattern; print plan; shirt and native top
- Unit 4: stabilised samples; scale cut plan; Kente outfit; cloth record
- Unit 5: trouser patterns; fitting records; two pairs
- Unit 6: wrinkle readings; two-fitting records; resize, sleeve re-set and restyle with photos
- Unit 7: times table; price list; capacity plan; apprentice plan; portfolio
- Every homework, dated
Self-check quiz
- What figure points do you note before drafting a block?
- Where does the extra front length over the bust go on the block?
- Bust 100 cm: what is each quarter's bust width on the beginner block?
- Name three things the slit-and-kaba study found in shops that spoil fit or finish.
- How do you draft a puff sleeve from a fitted sleeve?
- How much ease does a regular men's shirt get at the chest in this course?
- In which order do you attach the collar and stand to a shirt?
- What do you do before cutting across Kente strip joins?
- Seat 96 cm: what are the front and back crotch extensions in the beginner trouser draft?
- Horizontal folds across the upper back mean what?
- Materials GH¢40, 8 hours at GH¢22 including overheads, 25% margin: what price?
- Name two things a good apprentice training plan includes.
Further reading and sources
Best next reads: the NMSU guide to pattern alteration; the slit-and-kaba study by Kuma-Kpobee (2013); the hub's Garment Making and Industrial Sewing Level 2 for grading, jackets and uniforms.
What this module does not cover: grading, uniforms and batch production (Garment Making and Industrial Sewing); suits, ceremony outfits for couples, advanced fit, supervising a shop, order terms, registration, bookkeeping and growth (Level 3); embroidery machines. Current Takoradi sewing prices and the full text of the Kente specifications were not found.
Every source used in this manual is listed, with links, in the Teacher Copy.