← All training manualsTailoring and Dressmaking Level 3 · read-onlyGet the PDF with Teacher Copy (GH¢50)
Level 3 · Advanced · CTVET formatTrainee Manual

Tailoring and Dressmaking Level 3

Bespoke suits and ceremony wear, a pattern library and quality checks, a team that delivers on time, fair order terms, and your own registered, bookkept tailoring business with a 12-month plan you present to a panel.

Tailoring and dressmaking A made-to-measure tailor's shop. On the left a cutting table holds brown pattern paper with a drafted bodice, a curved ruler, tailor's chalk and a measurement card. In the middle a tailor with a tape measure round her neck measures the bust of a woman customer. Next to them a dress form wears a kaba and slit in bright wax print. On the right a man's two-piece suit and an African print shirt hang on a rail, with a kente stole folded beside them. 92 cm MEASURE · DRAFT · FIT · FINISH
Trainee name
Training centre
Start date
Group
Prepared by De-Graft Afful · Version 1.0.0 · November 2026
01

About this module

At Level 2 the outfit fitted. At Level 3 every outfit fits, every one is on time, the books balance, and the shop runs when you are not at the table.

Who it is for. People who have finished Tailoring and Dressmaking Level 2, or who can show the same skills: experienced tailors and dressmakers, senior apprentices, and anyone planning their own made-to-measure shop. Ghana's TVET framework has eight levels. National Proficiency II is for mostly routine work with limited supervision; National Certificate I is for complex and varied work under minimum supervision, and National Certificate II adds responsibility for guiding others. This module is written at an advanced level, comparable to National Certificate I, reaching toward National Certificate II where you supervise staff. That is the author's matching, not an official ruling.

CTVET status. CTVET lists Fashion Design Technology at National Proficiency I and II. Its unit list was not found online, so this module is not a CTVET curriculum and is not accredited. GNTDA apprentices sit a final trade test supervised by NVTI's Standards, Trade Testing and Certification Department.

Why this level matters

  • The slit-and-kaba study found most made-to-measure shops were micro businesses relying on domestic machines and unpaid trainee apprentices, which limited their output, their quality and their ability to meet deadlines. The author of the study recommended skilled workers, better equipment, standard procedures, partnerships and clusters so small dressmakers can grow and borrow.
  • A law lecturer has said that a missed delivery date can give the customer a claim for damages. Growing a shop without systems means growing the risk.
  • The Ghana Standards Authority has trained GNTDA members on textile and garment standards and certification, and the Registrar of Companies has run a registration clinic for GNTDA members. Formal, recorded businesses are what the state and lenders now look for.

Bridge from Level 2: what you already know

  • Figure notes; extra block measurements; a tested personal bodice block for each regular customer
  • Darted and princess kaba, sleeves drafted to the armhole, shaped slits, motif matching, two fittings
  • Men's shirts with collar and stand, print matching down the front, long native tops, fugu
  • The Kente rule; cut plans; stabilising and finishing handwoven cloth
  • Men's trousers drafted to measure; rise and seat fitting; fly and waistband
  • Reading wrinkles; resizing; restyling
  • Timed work, price list, capacity plan, apprentice training plan, portfolio, WhatsApp Business, accessibility

Level 2 did not cover the full bespoke suit with canvas and three fittings, ceremony orders for couples and families, a pattern library and a written quality check, leading a team through a rush, written order terms and dispute handling, registering a business, a full set of books for a made-to-measure shop, or a 12-month forecast. This manual does. Garment Making and Industrial Sewing Level 3 teaches production lines, grading, CMT costing, bridal bodices and a general sewing-business accounts month; this manual does not repeat those and goes deeper for the bespoke shop. For general bookkeeping and venture basics see the hub's Money Skills Level 2 and Entrepreneurial Thinking Level 2.

How the module works

Each unit has learning outcomes, performance criteria, the range and the evidence your assessor needs. You are judged Competent or Not Yet Competent. Units 1 to 4 are technical and leadership units. Units 5 to 7 are about your own business. About 70% of the time is practical. Every unit ends with homework and a short Check yourself quiz.

Every money figure marked example is invented to practise arithmetic. Fees, taxes and rates marked with a source were read on the page named; confirm them before you pay or print, because they change.

02

Unit 1 · Bespoke suits and ceremony tailoring

A bespoke suit is cut for one man's shoulders, one man's posture and one man's walk. Three fittings is not slow. It is the job.

Competency standard

Learning outcome Performance criteria — the trainee…
1.1 Take a suit order measures and notes posture for a suit; agrees cloth, construction, lining, style and fittings in writing
1.2 Draft and cut a suit drafts or adapts a jacket and trouser pattern to the customer and cuts with checks and stripes matched
1.3 Build the jacket builds the front with canvas or fusing, sets sleeves and collar, lines and finishes
1.4 Run three fittings runs a basted, a structure and a final fitting and records each
1.5 Plan ceremony orders plans couple's and family ceremony orders in matching cloth, with a schedule

Range. One two-piece suit (fused or half-canvas) for a real customer; one ceremony set (couple or family). Evidence. Order form; patterns; fitting records; finished suit; ceremony schedule; photos.

Ask a qualified expert. Steam irons and pressing at high heat cause burns; cool any burn under running water and see a doctor or nurse for anything large. Fusible interfacings release fumes when overheated; press in a ventilated room. Electrical faults in irons and machines go to a licensed electrician.

What Level 2 and Garment Making already gave you

You can draft trousers and a shirt to measure (Level 2). Garment Making Level 2 taught a basic lined jacket, and Garment Making Level 3 a suit order of work and a suit price example. Here you make the suit as a bespoke order for one man, and you lead the customer through the fittings.

Taking a suit order

  • The full men's set (Level 1) plus: shoulder slope (square, normal, sloping), posture (upright, normal, stooping), one shoulder lower, full chest or flat, stomach, seat; where he carries his phone and wallet
  • Cloth: his own, or bought by you (then you hold it as stock until it is cut into his order)
  • Construction: fused, half-canvas or full-canvas; tell him which he is paying for
  • Style: single or double-breasted, number of buttons, lapel shape, vents, pockets, trouser pleats or flat front
  • Lining: full or half; colour
  • Fittings: three dates booked now
  • Price, deposit, balance and delivery date in writing (Unit 4)

Canvas or fused: what you are building

A full-canvas jacket has canvas through the whole front; a half-canvas jacket has it through the chest and lapel only; a fused jacket uses fusible interfacing alone. Canvas lets the lapel roll softly and the chest shape itself to the man; fusing is faster and stiffer. A common order of work is: shape the under collar, front, back and shoulder seam; tailor the collar and pockets; set the sleeves with shoulder pads; finish hem and vents; add the lining; topstitch; sew buttons and buttonholes, pressing at every stage.

Half-canvas front, the steps (common practice):

  1. Cut the canvas chest piece to cover the chest and the lapel area, ending above the waist.
  2. Fuse a light interfacing to the whole front first if the cloth is soft.
  3. Lay the canvas on the wrong side of the front; mark the roll line of the lapel.
  4. Pad-stitch the lapel by hand: small diagonal stitches through canvas and a thread or two of cloth, rolling the lapel over your hand as you go so it curls the right way.
  5. Tape the roll line with a stay tape pulled slightly tight; this keeps the lapel lying close to the chest.
  6. Tape the front edge.
  7. Steam and press the chest shape over a ham.

Matching stripes and checks

A suit in a stripe or check must match at the front edge, across the back seam, at the side seams, the pockets, the sleeve at the front of the armhole, and the collar to the back. Lay the cloth in a single layer, cut one piece, flip it and match it for the second. Allow extra cloth (often 10–20% more) for matching (the author's guide; test on your layout).

Three fittings

  • Fitting 1, basted. Body tacked with canvas basted in, one sleeve tacked, no collar or a basted under collar. Check balance (front and back hems level), shoulders, chest, back width, sleeve pitch (does the sleeve hang straight?), jacket length, button position.
  • Fitting 2, structure. Pockets in, shoulders and side seams sewn, sleeves set, collar on, no lining. Check the lapel roll, collar sitting on the shirt collar, sleeve length with the shirt cuff showing about 1–1.5 cm (the author's guide; ask the customer), trouser seat and rise.
  • Fitting 3, final. Lined, buttonholes marked. Trouser hems marked on the man in his shoes; jacket and trousers together; he sits, walks and raises his arms.

Record each fitting on the card and change the pattern, so his next suit needs fewer fittings.

Ceremony orders for couples and families

Engagements (the traditional marriage), weddings, funerals, naming ceremonies and anniversaries bring orders for a couple or a whole family in matching cloth. At Ashanti weddings the bride's Kente kaba and slit is often matched with the groom's Kente cloth, and grooms at recent weddings have worn tailored suits, kaftans and agbada. These are lifestyle reports, not a rule; follow the family's wishes.

Plan a ceremony order like a project:

  1. Meet the couple (and the family's coordinator) early: at least six to eight weeks before the event for a couple and a few family members; longer for a large family (the author's guide; count your hours as in Level 2).
  2. List every person, garment, cloth and size on one sheet. Collect cloth from everyone by a fixed date.
  3. Measure everyone, or get measurements from another tailor in writing if a family member lives far away, and agree that fit risk in writing.
  4. Make the couple's outfits first; book their three fittings.
  5. Give the coordinator a weekly update on WhatsApp.
  6. Deliver everything at least three days before the event, so last-minute fixes are possible.
  7. Keep a spare of hooks, buttons, zips and thread in the colours for the event day.

Price a bespoke suit (example figures)

You supply the cloth. Suiting 3 m at GH¢120 a metre; canvas, interfacing, chest piece, shoulder pads, lining, pocketing and buttons GH¢280; 30 hours of work at GH¢22 an hour including overheads. You want a 30% margin. All figures are examples.

  1. What is the full cost?
  2. What is the price, rounded up to the nearest GH¢10?
  3. You ask a 60% deposit because you buy the cloth. How much is that?
  4. The customer cancels after you have cut the cloth and worked 8 hours. What could you fairly keep from the deposit, and where must this rule be written?

Suit and ceremony set

  1. Take a full suit order with a written order form for a real customer.
  2. Draft or adapt jacket and trousers; cut a toile of the jacket body and fit it.
  3. Cut the suit (fused is acceptable; half-canvas for a distinction), matching any stripe or check.
  4. Run three fittings and record them.
  5. Finish, press and deliver the suit with the order form signed as collected.
  6. Plan a ceremony order for a couple (and two family members) on one sheet, with dates, cloth and fittings; make at least the couple's two outfits.

Look inside a jacket

Borrow a good jacket. Feel the front: is it canvas (a loose layer you can pinch) or fused (stuck to the cloth)? Look at the lapel roll, the lining pleat and the buttonholes. Write five things you will copy in your own suit.

Check yourself

  1. What is the difference between a half-canvas and a fused jacket?
  2. What do you check at the first (basted) suit fitting?
  3. How early should a couple's ceremony order start, and when should it be delivered?
03

Unit 2 · Pattern library, difficult fits and quality control

The second order from a customer should be easier than the first. If it is not, your records have failed you.

Competency standard

Learning outcome Performance criteria — the trainee…
2.1 Keep a pattern library files blocks and style patterns by customer, with versions and dates
2.2 Fit difficult figures plans and fits for asymmetry, pregnancy, large sizes and wheelchair users
2.3 Check quality before delivery uses a written quality check with finished measurements against the card
2.4 Learn from complaints logs every complaint and remake, finds the cause and changes the method

Range. The trainee's own records; at least two difficult-fit customers. Evidence. Pattern index; difficult-fit records; quality check sheets; complaint log.

Ask a qualified expert. For pregnancy wear, never fit anything that presses on the stomach, and if a customer feels faint or unwell during a fitting, let her sit and suggest she see a doctor or nurse. For customers with a disability or after surgery, ask them what they need and follow their doctor's or nurse's advice.

A pattern library that works

Many Ghanaian dressmakers keep a book of customers' measurements, sometimes with sketches and swatches. At Level 3, add the patterns:

  • Customer file number on the card, the block and every pattern made for that customer
  • Block version: B1 (first tested), B2 (after re-measure or change), with dates
  • Style patterns stored with the block: "Kaba princess peplum, B2, March 2027"
  • Fitting notes on the back of each pattern: what changed and why
  • An index book or phone sheet: file number, name, blocks, styles, last measured
  • Store flat or rolled in labelled tubes or large envelopes, off the floor, away from damp and termites
  • Customers' records are private (Unit 4)

Difficult fits

Figure Plan Fitting tips
Asymmetry (one shoulder or hip higher) Draft both halves; mark R and L; never cut on the fold Fit both sides; pad the lower shoulder slightly in a jacket if he wishes
Pregnancy Extra front length and width over the bump; adjustable ties, elastic or side lacing; no pressure on the stomach Re-measure each month for long orders; book short fittings
Large sizes More panels (princess lines) for shape; balance the print scale Check movement: sitting, lifting arms
Wheelchair users Ask how they sit; shorter back skirt or jacket, higher back rise in trousers, less length at the front; openings they can reach Fit seated, in the chair
Very upright or stooping posture Shorten or lengthen the back (Level 2) Check collar and back neck

A university guide gives the pattern fix for each figure type, such as round shoulders, sway back, full seat and large upper arm. Use it with your own fitting notes.

A quality check before delivery

The slit-and-kaba study found no standard procedures in the shops it observed, and little attention to finishing the wrong side. At Level 3, nothing leaves without a signed check.

Finished measurements. Measure the finished garment at bust or chest, waist, hip or seat, length and sleeve. Compare with the card plus the ease you planned. The shop rule in this course (the author's): girths within 1 cm of the plan, lengths within 0.5 cm; anything outside goes back for correction before the customer sees it.

  • Fit: finished measurements within the shop rule
  • Cloth: no stains, chalk, shine, holes or iron marks
  • Matching: motifs, stripes and checks matched as planned
  • Seams: straight, even, no skipped stitches, ends secured
  • Inside: all edges finished, threads trimmed, lining free
  • Closures: zip runs smoothly; hooks, buttons and buttonholes firm and in line
  • Hem: level, invisible stitches
  • Pressing: final press with a press cloth
  • Order: matches the sketch and the order form; leftover cloth folded and labelled for return
  • Signed and dated by the person who checked (not the person who sewed, where possible)

Complaints and remakes

Keep a complaint log: date, customer, garment, what went wrong, cause, fix, cost, who did it, what you changed so it does not happen again. Complaints about tailors in Ghana often concern late delivery and lost cloth. Look at the log every month: the same cause twice means the method must change, not just the garment.

Pass or return? (example)

A kaba's planned finished bust is the card 96 cm plus 6 cm ease = 102 cm. The finished kaba measures 100.5 cm at the bust. The planned length is 60 cm; it measures 60.4 cm.

  1. Is the bust inside the shop rule?
  2. Is the length inside the rule?
  3. What do you do?

Library and quality

  1. Set up a pattern index for ten customers (real or practice) with file numbers and block versions.
  2. Plan and fit garments for two difficult-fit customers; record what you changed.
  3. Write your shop's quality check sheet and use it on five finished garments, one checked by a classmate.
  4. Start a complaint and remake log; fill in three entries (real or from your past work).

Your worst fit

Write one page about the worst fit you have ever made or seen: what went wrong, the cause, and the check that would have caught it.

Check yourself

  1. What goes on the back of each pattern in the library?
  2. Why should someone other than the sewer sign the quality check?
  3. How do you plan trousers for a wheelchair user?
04

Unit 3 · Lead the shop: people, workflow and the rush

A tailor alone has two hands. A master with a team has twenty. But only if every hand knows its job.

Competency standard

Learning outcome Performance criteria — the trainee…
3.1 Plan the workflow tracks every order on a job board from received to collected
3.2 Share the work gives each worker and apprentice tasks they are trained for and checks them
3.3 Plan capacity for a rush calculates team hours and stops taking orders when full
3.4 Lead and train runs a short daily meeting, keeps apprentice records and prepares apprentices for the trade test
3.5 Keep the shop safe runs a weekly safety check and keeps an accident record

Range. A shop of at least three people (or a simulation in class). Evidence. Job board; task records; capacity plan; apprentice records; safety checks.

Ask a qualified expert. Employing workers and apprentices brings duties under the Labour Act and SSNIT rules. This is general information, not legal advice: ask a qualified lawyer or the Labour Department before you write contracts or apprentice agreements. For wiring and extra machines on one socket, use a licensed electrician.

The job board

A job board is a wall chart or whiteboard with one card per order, moving left to right:

Received Cut Sewing Fitting Finishing Quality check Ready Collected

Each card shows: order number, customer file number, garment, who is working on it, fitting date and delivery date in red. Every morning, look at the red dates for the next seven days first.

Share the work by skill

The slit-and-kaba study found that garments were mostly produced by trainee apprentices supervised by the owner or senior apprentices, which sometimes affected quality, and that cutting was mainly done by the owner or a manager. Keep cutting of customer cloth, Kente and suits with yourself or a trusted senior. Give apprentices tasks they have been signed off for in their training record (Level 2), and check every task.

Task Who (example)
Measuring, drafting, cutting customer cloth and Kente Master or senior tailor
Cutting linings and toiles Senior apprentice
Overlocking, hand finishing, buttons, pressing Apprentices (signed off)
Sewing skirts, slits, simple tops Machinist or senior apprentice
Kaba with princess seams, suits, shirts with stands Master or skilled machinist
Quality check Master (or a different senior from the sewer)
Customer messages and collection One named person

Plan capacity for the rush

Demand for Ghana-made clothes rises before Christmas and tailors work late. Plan with numbers.

December capacity (example figures)

Your team: you (40 sewing hours a week), one machinist (40), two apprentices (20 useful hours each a week). December has 4 working weeks before Christmas. The average order takes 8 hours. You keep 10% of hours for remakes and alterations. All figures are examples.

  1. What are the team's useful hours a week?
  2. Total hours for the 4 weeks?
  3. Hours left for orders after the 10% reserve?
  4. How many orders can you accept?

Lead the team

  • Ten-minute morning meeting at the job board: red dates, today's tasks, problems
  • Show, do together, do alone while watched, check for every new task (Level 2)
  • Praise in public, correct in private
  • One rule for everyone: pins counted, irons upright, switch-off routine, customer cloth tagged
  • Written records: apprentice skills record signed monthly; task errors noted kindly and used for training
  • Fair pay and rest: workers are paid on time; no unpaid long nights without agreement

Workers and apprentices: the basics of the law

The Labour Act requires a written contract for work of six months or more (section 12), a written statement of the main terms within two months (section 13) and at least 15 working days of paid leave a year (section 20); maternity leave is 12 weeks. The 2026 national daily minimum wage is GH¢21.77. The employee pays 5.5% and the employer 13% of basic salary to SSNIT, and employers must register workers when they hire them. Whether an apprentice counts as a worker for SSNIT and the minimum wage was not verified; ask the Labour Department. This is not legal advice.

Prepare apprentices for the trade test

GNTDA apprentices sit a final trade test supervised by NVTI's Standards, Trade Testing and Certification Department, with practical and written parts. The National Apprenticeship Programme attaches trainees to master craftspersons in fields including dressmaking for six to twelve months. Ask the local GNTDA zone and the NVTI office for the current test syllabus and dates; they were not found online for this manual. A mock test in your shop: measure a customer, draft, cut and sew a set garment in a fixed time, and answer written questions on safety, measuring and fabrics.

A safe shop with more people

More machines and people mean more risk. Apprentices in Kumasi faced cuts, falls, shocks and needles through fingers. Weekly safety check: exits clear, cables off the floor, no overloaded sockets, irons upright and unplugged at closing, needle guards fitted, first-aid box stocked, lint cleaned with a damp cloth. Keep an accident record: who, what, when, what was done.

Run the shop for a week

  1. Set up a job board and track every order in class (or your shop) for one week.
  2. Write a task-sharing table for your team.
  3. Calculate your capacity for a normal month and for December.
  4. Hold five morning meetings and note one problem solved each day.
  5. Run a mock trade test for an apprentice or classmate and record the result.
  6. Do one weekly safety check and fill in the record.

Interview a master

Interview a master tailor with apprentices. Ask how they share work, how they handle the Christmas rush and how they prepare apprentices for the trade test. Write one page.

Check yourself

  1. Which tasks should stay with the master or a trusted senior, and why?
  2. A team has 100 useful hours a week for 4 weeks, keeps 10% in reserve, and orders average 8 hours. How many orders can it accept?
  3. What does the Labour Act say about written terms?
05

Unit 4 · Order terms, customer cloth, data and disputes

Most quarrels between tailor and customer start with something nobody wrote down.

Competency standard

Learning outcome Performance criteria — the trainee…
4.1 Write order terms writes a one-page order form with price, deposit, fittings, delivery, changes, cancellation and collection rules
4.2 Protect the customer's cloth keeps a cloth log from receipt to return of leftovers
4.3 Protect customer data keeps cards, photos and messages private and asks consent for photos
4.4 Handle complaints and disputes follows a calm, written dispute routine and knows when to seek advice

Range. The trainee's own order form; role-plays; real records. Evidence. Order form; cloth log; photo consent form; dispute record.

Ask a qualified expert. This unit is about agreements with customers. It is general information, not legal advice. Ask a qualified lawyer to read your order terms before you use them, and before you keep or sell any garment a customer has not collected. For data rules, check with the Data Protection Commission.

Why written terms

A law lecturer explained on radio that the agreed delivery date is a condition of the contract between a dressmaker and a customer, and that the purpose of the outfit (for example a Christmas event) matters: if the date is missed, the customer may claim damages and may refuse the late garment. The same programme noted that WhatsApp and Facebook sales sit outside some consumer protections that apply to other online sales, as the lecturers explained them. Writing terms down protects both sides.

The one-page order form

Section What it says (example wording to adapt with a lawyer)
Customer and order Name, file number, garment, style sketch, cloth received (length, description, photo)
Price Total price; what is included (lining, zip, embroidery)
Deposit Amount, and "work starts when the deposit and the cloth are received"
Fittings Dates booked; "a missed fitting may move the delivery date"
Delivery date The date, and that the shop will message at once if any delay is likely
Changes "A change of style after cutting may cost extra and move the date"
Cancellation What is refunded before cutting, and what is kept after cutting (costs of work done)
Collection Pay the balance on collection; how long the shop will keep a finished garment; what happens after that (see below)
Photos Whether the customer agrees to photos for the portfolio (tick yes or no)
Signatures Customer and shop, with the date

Give the customer a copy (a photo on WhatsApp is fine) and keep yours.

The customer's cloth log

Column Example
Received (date, length, description, photo number) 12 Oct, 6 yards wax print, blue and gold, photo 0412
Order number 2027-118
Cut by and date Master, 15 Oct
Leftover returned (length, date, signed) 1.8 m returned 2 Nov, signed

Customer's cloth is not your stock. It is held for the customer; never use it for another order, and record leftovers. Cloth you buy for an order is your stock until it is cut for that customer (Unit 6).

Uncollected garments

Some customers do not collect. No Ghana rule on uncollected tailored garments was found for this manual (not verified). Good practice (the author's, to check with a lawyer):

  1. Write the collection period in the order form (for example "finished garments are kept for 60 days").
  2. Message on the delivery day, after 2 weeks and after 4 weeks; keep the messages.
  3. Keep the garment, labelled, in a bag, for the full period.
  4. Never sell or give away a customer's garment without legal advice; the cloth was theirs.
  5. Ask a lawyer what you may do after the period, and put that answer in your terms.

Customer data and photos

Measurement cards, phone numbers, photos and WhatsApp chats are personal information. Check with the Data Protection Commission whether your business must register. Good practice:

  • Cards and pattern files locked away; the phone has a lock code
  • Photos of customers posted only with their written yes on the order form
  • Post the garment on a dress form or crop out faces where consent is not given
  • Never share a customer's measurements with anyone else without their permission
  • Delete old customers' photos from shared phones

When something goes wrong

  1. Listen without arguing; let the customer show the problem.
  2. Look at the garment, the order form, the fitting record and the cloth log together.
  3. Offer what you can do: correct, remake, or refund part, with a date.
  4. Write it in the dispute record and agree it in a message.
  5. If you cannot agree, ask the local GNTDA zone executives to help settle it, and for larger sums get advice from a lawyer.

Cancellation and refund (example figures)

A customer ordered a lined kaba and slit for GH¢300 with a GH¢150 deposit. Your terms say: before cutting, full refund less GH¢20 for measuring and drafting; after cutting, the shop keeps the cost of materials bought for the order and of hours worked at GH¢22 an hour, and the cut cloth is returned. She cancels after cutting. You bought lining and zip for GH¢30 and worked 3 hours. All figures are examples.

  1. How much do you keep?
  2. How much do you refund?
  3. What else do you give back?
  4. If she had cancelled before cutting, what would you refund?

Terms and records

  1. Write your one-page order form; ask a classmate to find gaps.
  2. Start a cloth log and use it for every order for one month.
  3. Add a photo-consent tick box and use it.
  4. Role-play three disputes (late delivery, a poor fit, a lost piece of cloth) using the five steps; record each.

Ask about terms

Ask a lawyer, a GNTDA zone executive or an experienced tailor to read your order form. Write the changes they suggest.

Check yourself

  1. Why is the delivery date so important in a tailoring order?
  2. Is a customer's cloth part of your stock?
  3. What must you never do with an uncollected garment without legal advice?
06

Unit 5 · Establish your own tailoring business

You can cut, fit and lead. Now make the business legal, funded, safe and easy to find.

Competency standard

Learning outcome Performance criteria — the trainee…
5.1 Choose a legal form compares sole proprietor, partnership, company and cooperative and chooses one with reasons
5.2 Register step by step lists every body, document and fee a made-to-measure shop needs in Sekondi-Takoradi
5.3 Plan premises and start-up chooses a site and prices a start-up budget
5.4 Fund the start compares funding sources and calculates a loan's true cost
5.5 Staff, insure and protect plans staff under the Labour Act, insurance and safety
5.6 Market and include plans marketing and an accessible shop

Range. The trainee's own planned shop in Sekondi-Takoradi or the Western Region. Evidence. Registration checklist; start-up budget; funding plan; one-page plan; two-minute pitch.

Ask a qualified expert. Registration, tax, loans and insurance are legal and financial matters. This is general information, not legal advice: ask a qualified lawyer before you sign; check tax with GRA or a qualified accountant; and ask a licensed financial adviser, your bank or a qualified accountant before you borrow.

See the hub's Entrepreneurial Thinking Level 2 and Money Skills Level 2 for the basics, and Garment Making and Industrial Sewing Level 3, Unit 5 for a sewing workshop with a production line. This unit is for a bespoke shop.

Choose the legal form

Form Law and cost (2026) For a tailoring shop
Sole proprietor (business name) Registration with the Office of the Registrar of Companies (ORC): GH¢130; renewal GH¢70 a year The usual start. The owner has unlimited liability: personal property can be at risk for business debts
Partnership GH¢270; renewal GH¢100 a year; 2 to 20 partners; partnership agreement stamped by the Lands Commission Valuation Division Two tailors sharing a shop; write who brings what and who does what
Company limited by shares GH¢585 plus a 1% capital duty on stated capital as stated on the page; at least two directors and a secretary; a consent letter from an ICAG chartered accountant When you employ many, sign large contracts or take in investors; yearly return GH¢175
Company limited by guarantee GH¢490; no profit to members For a training NGO or a church sewing project, not a profit shop
Cooperative Not registered at the ORC; needs an organisational TIN from GRA Tailors sharing machines or buying together; Department of Co-operatives route not verified

Late annual returns cost GH¢1,000 for one to four years late and GH¢2,000 for five or more. The slit-and-kaba study suggested partnerships and clusters so small dressmakers can pool resources and get longer loans.

Register step by step

Step Body What and cost
1 ORC Register the business name: GH¢130
2 GRA Your Ghana Card PIN is your TIN since 1 April 2021; a company gets a GRA TIN after ORC registration
3 Assembly (STMA) Business Operating Permit through the STMA portal. The 2025 schedule lists non-industrial dressmaker or tailor at GH¢120 small, GH¢150 medium, GH¢190 large a year. Confirm your category. Outside the metro, ask your own Assembly: the HSM Agrictech Hub, for example, is under the Mpohor Wassa East District Assembly, which uses the STMA schedule
4 Ghana National Fire Service Fire certificate; the online charges page lists non-residential premises at GH¢500 plus processing fees. Confirm what applies to a small shop
5 SSNIT Register as an employer when you hire; register workers on hiring
6 GRA Choose your tax route (below)
7 Data Protection Commission You hold names, phones, body measurements and photos: check whether you must register
8 National Insurance Commission Buy cover only from an NIC-licensed insurer

FDA and EPA permits for food and chemical businesses do not normally apply to a tailoring shop; if you add dyeing or printing, ask the Assembly what applies.

Tax route. Under the Modified Taxation Scheme, a resident individual with business income only and not VAT-registered pays fixed amounts on turnover up to GH¢20,000, and 3% of turnover (or tax on a modified cash basis) on turnover of GH¢20,001 to GH¢750,000, paid by *880# or the MTS app; professionals, owners of several businesses or outlets, and partners are excluded. GRA's own page still showed GH¢500,000 as the top limit in October 2026. Companies pay 25% income tax, or 18.5% for manufacturers in regional capitals other than Accra and Tema, which includes Takoradi. From 1 January 2026, VAT is 15% plus NHIL 2.5% and GETFund 2.5%; the registration threshold for goods rose to GH¢750,000. For services there is no turnover threshold: a taxable person supplying taxable services registers within 30 days of starting. Made-to-measure sewing on the customer's cloth is mostly a service. Ask GRA in writing how your shop is classed before you start, and keep the answer.

Premises and location

  • Near cloth sellers, markets, churches and offices; in Takoradi, busy areas such as Market Circle
  • Space for a cutting table, sewing, pressing, a private fitting room with a mirror and a lockable cloth store
  • Good daylight or bright white light for matching prints
  • Reliable power and a back-up; electricity tariffs rose 3.49% from 1 July 2026
  • Visible sign, clean window display
  • Step-free entrance; a fitting room wide enough for a wheelchair
  • A lease in writing, read by a lawyer before you sign

Start-up budget (example)

A small bespoke shop: the owner, one machinist and two apprentices. Machine prices follow online listings; everything else is an example.

Item GH¢ (example)
2 used industrial lockstitch machines at 3,700 each 7,400
1 domestic electric machine (for light work and back-up) 1,300
1 overlocker 3,000
1 steam iron and pressing table, ham, sleeve board 1,500
Cutting table, shears, rulers, curves, tapes 1,800
1 dress form 700
Fitting room: curtain, mirror, chair 700
Lockable cloth shelves 900
Chairs with backrests, task lights 1,200
Extinguisher, first-aid box, wiring check by a licensed electrician 1,000
Equipment total 19,500
Registration: business name 130, Assembly permit 150, fire certificate 500 780
Sign, label printing, portfolio photos 900
Rent advance, 6 months at 800 4,800
Opening stock: linings, zips, threads, interfacings, buttons 2,500
Working cash 4,000
Total 32,480

The registration figures are from the sources above; the fire certificate is the listed charge only.

Fund the start-up (example figures)

Total needed: GH¢32,480. The owner has GH¢15,000 saved and a savings-group (VSLA or susu) loan of GH¢5,000. A licensed microfinance lender offers the rest over 12 months at a flat 3% a month on the original amount (an example, not a real quote).

  1. How much is borrowed from the lender?
  2. What is the total interest over 12 months and the monthly instalment?
  3. Interest as a share of the loan for the year?
  4. What must you ask the lender for in writing?

Funding options

  • Savings and savings groups. Government has planned a programme to link savings groups (VSLAs) to banks.
  • Ghana Enterprises Agency. Programmes include SME GO, Business-in-a-Box, SME High Growth and Kaizen, with business advisory centres in Takoradi, Shama, Effia-Kwesimintsim, Mpohor and Ahanta West. Ask the centre which rounds are open.
  • 2026 Budget programmes: GH¢170 million for the National Apprenticeship Programme, GH¢160 million for Adwumawura and GH¢401 million for a Women's Development Bank. Check who can apply.
  • Assemblies' disability fund: raised from 3% to 5% in 2026, aimed at skills, assistive devices and start-up support; the Sekondi-Takoradi Assembly has given industrial sewing machines to persons with disabilities.
  • Loans: only from licensed lenders, with the APR in writing.

Never pay an "application" or "processing" fee to a personal number to get a grant or loan. Real programmes do not ask for that. Check at the agency's own office.

Staff, insurance and safety

Unit 3 gave the Labour Act and SSNIT basics. PAYE is deducted from employees' pay each month and is due by the 15th of the next month. Buy insurance only from an NIC-licensed insurer and get three written quotes; which covers are compulsory for a small shop was not verified. Think about fire, theft and customers' cloth in your care, which may be worth more than your machines. Keep your fire certificate and safety check on the wall.

Market yourself

  • WhatsApp Business: catalogue of styles with "from" prices, labels for "fitting booked" and "ready", quick replies
  • Google Business Profile: free listing with address, hours, photos and reviews
  • Portfolio and label: every outfit photographed with consent; your label inside
  • Referrals: a thank-you for every new customer a customer brings
  • Associations: your GNTDA zone, church groups, wedding planners and event decorators
  • Small Ghanaian fashion firms market mostly through WhatsApp, Instagram and Facebook

Accessibility

Ghana's Persons with Disability Act, 2006 (Act 715) requires people who serve the public to make their services accessible. Many tailoring tasks are workable for persons with disabilities: drafting, cutting at a seated table, machine sewing (hand-controlled industrial machines exist for wheelchair users), hand finishing, pressing at a lowered board, records and customer messages. Deaf machinists work in Ghanaian factories with sign-language support. Inclusive design guidance for TVET buildings asks for wide doors and turning space for wheelchairs. In your plan: a step-free entrance, a wide fitting room, a cutting table at wheelchair height, written order cards for deaf customers, large-print price lists, and a visual alarm.

The one-page business plan

  • Who I am, my skills, my legal form
  • What I sell: made-to-measure women's and men's wear, ceremony orders, alterations
  • Who buys: three named customer groups and why they will come to me
  • Prices: my price list from timed work (Level 2) and the suit costing (Unit 1)
  • Rules: registrations done and still to do
  • Shop: site, layout, equipment, safety, access
  • People: staff, apprentices, pay
  • Money: start-up budget, funding, monthly profit (Unit 6), 12-month forecast (Unit 7)
  • Risks: late delivery, lost cloth, power cuts, slow months, a key worker leaving, and how I reduce each

Register and pitch

  1. Complete a registration checklist with body, document, cost and date for your planned shop.
  2. Build your start-up budget and funding plan.
  3. Write the one-page plan.
  4. Pitch it in two minutes to a classmate acting as a lender.

Three visits

Visit (or use the official portals of) the ORC, the STMA revenue office and the GEA business advisory centre in Takoradi. Write one thing you learned from each.

Check yourself

  1. What does unlimited liability mean for a sole proprietor?
  2. Why must a tailor ask GRA about VAT even with a small turnover?
  3. Name four registrations or permits for a tailoring shop in Sekondi-Takoradi.
07

Unit 6 · Bookkeeping for a made-to-measure shop

In a tailoring shop the money comes in twice for every order: once as a deposit, once as the balance. If you count it as profit the first time, you will spend money that is not yet yours.

Competency standard

Learning outcome Performance criteria — the trainee…
6.1 Keep daily records keeps an order book, cash book (cash, MoMo, bank), receipts and a petty cash record
6.2 Treat deposits correctly records deposits as money owed to customers until delivery
6.3 Count stock counts trims stock monthly and works out trims used; keeps customers' cloth out of stock
6.4 Pay staff correctly works out SSNIT and PAYE for a worker
6.5 Produce statements draws a monthly profit and loss and a simple balance sheet that balances
6.6 Price, break even and depreciate uses margin and mark-up correctly, finds break-even and charges straight-line depreciation
6.7 Close the month reconciles cash and MoMo, runs the month-end routine and files tax records

Range. One month of example records and one week of the trainee's own. Evidence. Order book; cash book; stock count; payroll sheet; profit and loss; balance sheet; reconciliation.

Ask a qualified expert. Tax, SSNIT and PAYE rules change. Check with GRA or a qualified accountant before you file, and ask SSNIT about your own workers. This unit teaches simple bookkeeping, not tax advice.

The hub's Money Skills Level 2 teaches the cash book and simple statements; Garment Making and Industrial Sewing Level 3, Unit 6 works a month for a general sewing workshop. This unit works the bespoke shop's special points: deposits, customers' cloth, alterations and fitting-heavy work.

The daily records

Record What goes in it
Order book Every order: number, customer, price, deposit, balance, fitting and delivery dates (Level 1)
Cash book Every cedi in and out, in three columns: cash box, MoMo, bank
Receipt book A numbered receipt for every deposit and every balance, copy kept
Petty cash Small purchases (thread, a zip, transport) with a slip
Trims stock sheet Linings, zips, interfacings, buttons bought and counted
Cloth log Customers' cloth (Unit 4): not part of your money or stock
Alterations book Walk-in jobs and payments (Level 1)

Deposits are owed, not earned

A deposit is the customer's money held against an order not yet delivered. If you cancel or fail to deliver, it must be refunded (Unit 4). So in the books, a deposit is a liability (money you owe) until the garment is delivered; only then does it become sales. Assets equal liabilities plus the owner's equity.

A month for Esi's Bespoke (example numbers)

Esi runs a made-to-measure shop with one machinist and two apprentices. All numbers are examples.

Opening, 1 March: cash box GH¢800; MoMo GH¢1,200; bank GH¢4,000; equipment (net) GH¢12,000; trims stock GH¢900; deposits held for 6 undelivered orders GH¢1,500.

During March:

# What happened Cash box MoMo Bank
1 New deposits received for March and April orders +1,200 +3,000
2 Balances paid on collection of 30 delivered orders +1,800 +3,500
3 Alterations paid in cash +1,400
4 Trims bought (lining, zips, interfacing, buttons) −300 −600 −1,200
5 Rent −800
6 Electricity −450
7 Machine repair −150
8 Data, airtime and adverts −200
9 Apprentice allowances −600
10 MoMo charges −40
11 Machinist's net pay (see payroll below) −1,055.95
12 Cash banked −2,000 +2,000
13 Owner's drawings −1,500

The 30 orders delivered in March were worth GH¢9,600 in total: GH¢4,300 of that was deposits already held (all GH¢1,500 from February and GH¢2,800 of March's new deposits), and GH¢5,300 was balances paid on collection.

Closing trims count, 31 March: GH¢1,000.

Payroll for the machinist (worked example)

Basic salary GH¢1,200 (example). SSNIT: employee 5.5% and employer 13% of basic. PAYE monthly bands for 2026: first GH¢588 at 0%, next 80 at 5%, next 100 at 10%, next 2,900 at 17.5%, after deducting the employee's SSNIT first.

Line GH¢
Basic salary 1,200.00
Employee SSNIT 5.5% 66.00
Taxable pay (1,200 − 66) 1,134.00
PAYE: 588 at 0% 0.00
next 80 at 5% 4.00
next 100 at 10% 10.00
remaining 366 at 17.5% 64.05
PAYE total 78.05
Net pay (1,200 − 66 − 78.05) 1,055.95
Employer SSNIT 13% (a cost to the shop) 156.00
Owed to SSNIT (66 + 156), due within 14 days after month-end 222.00
Owed to GRA for PAYE, due by the 15th 78.05

Closing cash

Cash box MoMo Bank Total
Opening 800.00 1,200.00 4,000.00 6,000.00
In 4,400.00 6,500.00 2,000.00 12,900.00
Out 3,050.00 2,790.00 3,055.95 8,895.95
Closing 2,150.00 4,910.00 2,944.05 10,004.05

(Cash box in: 1,200 + 1,800 + 1,400; out: 300 + 150 + 600 + 2,000. MoMo in: 3,000 + 3,500; out: 600 + 450 + 200 + 40 + 1,500. Bank in: 2,000; out: 1,200 + 800 + 1,055.95.)

Profit and loss, March (example)

GH¢
Sales: orders delivered 9,600.00
Sales: alterations 1,400.00
Total sales 11,000.00
Trims used (opening 900 + bought 2,100 − closing 1,000) 2,000.00
Rent 800.00
Electricity 450.00
Machine repair 150.00
Data, airtime, adverts 200.00
Apprentice allowances 600.00
Machinist's gross pay 1,200.00
Employer SSNIT 156.00
MoMo charges 40.00
Depreciation (below) 200.00
Total costs 5,796.00
Profit before tax 5,204.00
Tax set aside: Modified Taxation 3% of turnover (11,000 × 3%), if she is on the MTS 330.00
Profit after tax 4,874.00

Not in sales: the GH¢1,400 of March deposits for orders not yet delivered. Not in costs: the owner's drawings (that is the owner taking profit, not a business cost), and the customers' cloth.

Depreciation (straight-line)

Straight-line depreciation = (cost − salvage value) ÷ useful life. Esi's machines and equipment cost GH¢14,400, with an expected salvage value of GH¢2,400 after 5 years (example). (14,400 − 2,400) ÷ 5 = GH¢2,400 a year = GH¢200 a month. Net equipment falls from 12,000 to 11,800.

Balance sheet, 31 March (example)

Assets GH¢ Liabilities and equity GH¢
Cash (box, MoMo, bank) 10,004.05 Deposits held for undelivered orders (1,500 + 4,200 − 4,300) 1,400.00
Trims stock 1,000.00 SSNIT owed 222.00
Equipment (net) 11,800.00 PAYE owed 78.05
Tax set aside (MTS) 330.00
Total liabilities 2,030.05
Owner's equity: opening 17,400 + profit 4,874 − drawings 1,500 20,774.00
Total assets 22,804.05 Total liabilities and equity 22,804.05

Opening equity was 6,000 cash + 12,000 equipment + 900 stock − 1,500 deposits = GH¢17,400. It balances. A balance sheet that balances is a good check, but like a trial balance it can still hide a mistake.

Deposits and cloth (example)

In April Esi receives GH¢3,600 of new deposits, delivers orders worth GH¢8,000 (of which GH¢2,600 were deposits already held), and a customer's 6 yards of Kente arrive for an engagement order.

  1. Deposits held at the start of April were GH¢1,400. What are they at the end of April?
  2. How much of April's delivered orders was paid as balances on collection?
  3. Does the Kente go into Esi's stock or her assets? Where is it recorded?

Margin, mark-up and break-even

  • Margin is profit as a share of the price; mark-up is profit as a share of the cost. A kaba and slit costing GH¢240 in trims, labour and overheads sold at GH¢320 has a profit of 80: margin 80 ÷ 320 = 25%; mark-up 80 ÷ 240 = 33.3%. Do not mix them up.
  • Break-even = fixed costs ÷ (average price − variable cost per order).

Break-even for Esi (example figures)

Esi's fixed costs a month: rent 800, power 450, apprentice allowances 600, machinist pay plus employer SSNIT 1,356, data 200, depreciation 200. The average order price is GH¢320; trims and charges for each order average GH¢65.

  1. What are the fixed costs a month?
  2. What does each order contribute?
  3. How many orders a month to break even?
  4. In March she delivered 30 orders plus alterations. Was she above break-even?

Month-end routine

  • Count the cash box; check the MoMo statement and the bank statement against the cash book (reconcile every difference)
  • Count trims stock; work out trims used
  • List undelivered orders and their deposits (this must equal "deposits held")
  • List customers' cloth in the shop (cloth log) and check every piece is there
  • Pay SSNIT within 14 days and PAYE by the 15th; set aside MTS or file VAT as GRA has told you
  • Draw the profit and loss and the balance sheet; compare with last month
  • File every receipt and statement in a monthly folder

Keep records in Ghana for at least six years from the end of the tax year. Free tools such as Zoho Books' free plan or Wave can help once you are comfortable on paper.

Close a month

  1. Enter Esi's March in a cash book with three columns; check your closing figures.
  2. Prepare her profit and loss and balance sheet without looking; compare.
  3. Keep your own shop's (or a role-play shop's) records for one week: order book, cash book, receipts, stock count.
  4. Reconcile your MoMo statement for that week with your cash book.

Your own break-even

Work out the fixed costs, average price and variable cost of your planned shop. How many orders a month must you deliver to break even?

Check yourself

  1. Why is a deposit a liability until delivery?
  2. What is the difference between margin and mark-up?
  3. Where do owner's drawings go: profit and loss or balance sheet?
08

Unit 7 · Grow, sustain and present your plan

Growth is not more orders. It is more orders delivered on time, at a profit, by a team that could run a week without you.

Competency standard

Learning outcome Performance criteria — the trainee…
7.1 Keep quality as you grow writes a short set of shop procedures from order to collection
7.2 Care for customers and price well plans customer care and a pricing strategy (express, ceremony, alterations)
7.3 Grow wisely chooses growth options and checks them with numbers
7.4 Forecast cash builds a 12-month cash-flow forecast that adds up
7.5 Sustain and succeed plans records for loans, succession and ethics
7.6 Present the plan presents a one-page plan and forecast to a panel

Range. The trainee's own planned or real shop. Evidence. Procedures; price strategy; forecast; panel presentation and score sheet.

Ask a qualified expert. Growth may mean loans, leases, partnerships and contracts. This is general information, not legal advice: ask a qualified lawyer before you sign, ask a licensed financial adviser, your bank or a qualified accountant before you borrow, and check tax with GRA.

Shop procedures in one page

The slit-and-kaba study found no standard procedures in the shops it observed. Write yours:

  1. Order: order form signed, cloth logged and photographed, deposit receipted, file number given, dates on the job board.
  2. Draft and cut: from the customer's latest block; cut plan for prints and Kente; cut by master or senior.
  3. Sew: tasks shared by skill; press as you sew.
  4. Fit: booked fittings; every change on the pattern.
  5. Check: quality sheet signed by someone other than the sewer.
  6. Deliver: message the customer; balance receipted; leftover cloth returned and signed; photo with consent.
  7. Follow up: a message after one week: "How is the outfit?" Complaints logged.

Customer care and pricing strategy

  • Keep promises first: on-time delivery builds trust and referrals.
  • Price by value, not only by hours: a ceremony outfit for a wedding day carries more risk and more fittings; price it above an everyday kaba.
  • Express service at a stated extra charge, only if the job board has room.
  • Ceremony packages: a price per person for family orders, with a deposit schedule.
  • Loyalty: a regular customer's tested block saves you time; you can offer a small loyalty discount and still earn more per hour.

The loyalty discount (example figures)

A new customer's kaba and slit takes 10 hours including two fittings; a regular customer with a tested block takes 7.5 hours (one fitting). You charge GH¢300 for both. Materials GH¢40; time and overheads GH¢22 an hour. All figures are examples.

  1. What is your profit on the new customer's order?
  2. On the regular customer's order?
  3. If you give regulars a 10% discount, what is the profit on their order now?

Ways to grow

Option Good for Watch out
A second skilled tailor More capacity, less risk when you are ill Pay on time; written terms; quality checks
A ceremony and wedding service Higher-value orders; group work Long planning; deposits; firm dates
Ready-to-wear in standard sizes Sales when custom orders are slow Needs grading and batches: see Garment Making Levels 2 and 3
Corporate and church orders Repeat work Size charts and signed samples (Garment Making Level 2); payment terms
Training paying learners Steady income; reputation You become a trainer: plan, records, safety, trade tests
A cluster or cooperative with other tailors Shared machines, bulk buying, bigger orders Written agreement; the slit-and-kaba study recommended partnerships and clusters

Records for loans

Lenders and programmes ask for proof. Keep: registration certificates, 12 months of cash books and MoMo and bank statements, monthly profit and loss and balance sheets, your order book (shows demand), tax receipts and SSNIT receipts. The 2026 Budget funds programmes such as Adwumawura and a Women's Development Bank; the Ghana Enterprises Agency's business advisory centres help small firms.

Succession and ethics

  • Succession: train a senior who can run the shop; write down your procedures; keep the pattern library and the cloth log in order so another person could carry on.
  • Ethics: never cut a customer's cloth for another order; never call a print "Kente"; never keep a deposit for an order you cannot deliver; never post a customer's photo without consent; pay workers on time; never sell an uncollected garment without legal advice.

Your 12-month cash-flow forecast (example)

A cash-flow forecast predicts money in and money out each month. Esi's example: fixed outflows GH¢3,700 a month, variable outflows (trims, charges) 20% of money in, owner's drawings GH¢1,500, and a new overlocker for GH¢4,500 in September before the school-reopening and Christmas season. Money in rises in March and April (Easter), September (school reopening) and December (Christmas). All numbers are examples.

Month Opening Money in Money out Closing
Jan 8,000 7,000 6,600 8,400
Feb 8,400 7,500 6,700 9,200
Mar 9,200 9,500 7,100 11,600
Apr 11,600 10,500 7,300 14,800
May 14,800 8,500 6,900 16,400
Jun 16,400 8,000 6,800 17,600
Jul 17,600 7,500 6,700 18,400
Aug 18,400 9,000 7,000 20,400
Sep 20,400 11,000 11,900 19,500
Oct 19,500 9,000 7,000 21,500
Nov 21,500 9,500 7,100 23,900
Dec 23,900 15,000 8,200 30,700
Year 8,000 112,000 89,300 30,700

Check: opening 8,000 + money in 112,000 − money out 89,300 = 30,700, the December closing. Money out each month = 3,700 + 20% of money in + 1,500 (plus 4,500 in September). Remember that money in includes deposits for orders not yet delivered: the cash is real, but some of it is owed until delivery (Unit 6).

Test the forecast (example)

  1. Check June: 3,700 + 20% of 8,000 + 1,500 = ?
  2. Why is September's money out so high, and is the closing cash still safe?
  3. If December's money in were only GH¢10,000, what would December's money out and closing cash be?

Capstone: present to a panel

You present your one-page business plan (Unit 5) and your 12-month cash-flow forecast to a panel of two or three people (a tailor, a business adviser, a banker or Assembly officer if possible), in ten minutes, then answer questions for ten minutes.

  • Who you are, what you sell and to whom (with three real customer conversations)
  • Your price list and one full costing (a suit or a ceremony outfit)
  • Your registrations and permits, done and to do
  • Your shop: site, layout, safety, access
  • Your team and how you share and check work
  • Your order terms and cloth log
  • Your start-up budget and funding
  • Your break-even and a month's profit and loss
  • Your 12-month forecast, with the risk months
  • Your three biggest risks and what you will do about each

Present your plan

  1. Write your shop procedures on one page.
  2. Write your pricing strategy (everyday, ceremony, express, loyalty).
  3. Build your own 12-month forecast with your real or planned numbers; check every month adds up.
  4. Rehearse your ten-minute presentation twice with a classmate.
  5. Present to the panel and record the panel's three main comments.

Ask a customer

Ask three customers (or likely customers) what would make them stay with one tailor for ten years. Add their answers to your plan.

Check yourself

  1. Why does a regular customer's tested block raise your profit?
  2. What check proves a cash-flow forecast adds up?
  3. Name three things to keep for a loan application.
09

Glossary

Term Meaning
Balance sheet A list of what the business owns and owes, and the owner's equity, on one date
Break-even The number of orders at which sales just cover all costs
Canvas A firm cloth layer inside a jacket front that shapes the chest and lapel
Cash-flow forecast A month-by-month plan of money in and money out
Cloth log A record of customers' cloth from receipt to return of leftovers
Deposit held Money paid in advance for an order not yet delivered; a liability
Depreciation The share of a machine's cost charged as a cost each month or year
Job board A chart showing every order and its stage
Margin / mark-up Profit as a share of price / profit as a share of cost
Pad stitch Small hand stitches that join canvas to cloth and shape a lapel
Pattern library A filed set of each customer's blocks and patterns with versions
Roll line The line along which a lapel turns back
Sleeve pitch The angle at which a sleeve hangs from the shoulder
10

Logbook

Copy these pages into an exercise book. Your logbook is part of your assessment evidence.

  • Unit 1: suit order form; patterns; three fitting records; ceremony sheet; photos
  • Unit 2: pattern index; difficult-fit records; quality check sheets; complaint log
  • Unit 3: job board photos; task table; capacity plans; meeting notes; mock trade test; safety check
  • Unit 4: order form; cloth log; photo consent; dispute records
  • Unit 5: registration checklist; start-up budget; funding plan; one-page plan
  • Unit 6: cash book; payroll sheet; profit and loss; balance sheet; reconciliation; break-even
  • Unit 7: procedures; pricing strategy; forecast; panel score sheet and comments
  • Every homework, dated
11

Self-check quiz

  1. Name the three suit fittings and one thing checked at each.
  2. How early should a couple's ceremony order start in this course?
  3. What is this course's shop rule for finished girths and lengths?
  4. A team has 120 useful hours a week for 4 weeks, keeps 10% in reserve, and orders average 8 hours. How many orders?
  5. What does the Labour Act require in writing, and when?
  6. Name five sections of the one-page order form.
  7. Is a customer's cloth part of your stock?
  8. Name the ORC fee for a business name and its yearly renewal.
  9. Deposits held at the start of a month are GH¢1,400; new deposits GH¢3,600; deposits used on delivery GH¢2,600. Deposits held at the end?
  10. Basic pay GH¢1,200: what is the employee's SSNIT and the PAYE in this course's example?
  11. Fixed costs GH¢3,606, average price GH¢320, variable cost GH¢65: break-even orders?
  12. What is the forecast check?
12

Further reading and sources

Best next reads: the Labour Act 2003; GRA's pages on modified taxation, VAT and PAYE; the ORC fees page; the NMSU guide to pattern alteration; the slit-and-kaba study by Kuma-Kpobee (2013); Money Skills Level 2, Entrepreneurial Thinking Level 2 and Garment Making and Industrial Sewing Level 3 in this hub.

What this module does not cover: production lines, grading, CMT costing, tenders and exporting (Garment Making and Industrial Sewing Level 3); embroidery machines; full bridal gown construction (Garment Making Level 3 has a bridal bodice); the NVTI trade test syllabus (not found online); a Ghana rule on uncollected garments (not found); current Takoradi sewing prices (check locally). It is not legal, tax or financial advice.

Every source used in this manual is listed, with links, in the Teacher Copy.

One application of the Cold-Start Learning Kit, which stays general-purpose and can build a guide on any topic in any field. Written in CTVET format; not a CTVET curriculum.